Drawer and Cover Removal
Drawers at the bottom of the fresh
food compartment will stop before
coming all the way out of the
refrigerator, to
prevent
contents from spilling onto floor.
These drawers can be removed
easily by grasping the sides
lifting up slightly while pulling
drawers past the “stop” location.
To remove drawers and their cover
when the fresh food compartment
door cannot be opened fully, follow
the procedure that applies to your
model:
Drawers with Glass Cover
1. Remove the drawer
‘\
from the door.
2. Slide the other
drawer to the middle
remove
,
3. Reach in, push the front of the
glass cover up and, at the same
time, pull it forward until it clears
the frame the back.
4. Tilt and remove the glass cover.
5. Remove the 3 drawer slides.
6. Remove the drawer frame as
follows:
●
Lift the front of the frame to free
it from the supports at each side.
●
Lift the rear of the frame to free
its hooks from the tracks on the
back wall of the refrigerator.
●
Tilt the frame and take it out.
To replace:
1. Fit the hooks on the drawer
frame into the
slots on the tracks at the
rear of the refrigerator and lower
the front of the frame until it locks
into position and rests on the front
supports at each side.
9
‘1
I
.
“1
‘--
I
2. Put the drawer slides back on
the frame. The sloped ends must
beat the front.
3. Slide the center and right drawer
slides toward the middle and slide
the l/3-width drawer all the way
into them.
4. Slide the l/3-width drawer all the
way to the right.
5. Mount the 213-width drawer
onto the center and left slides.
6. Replace the glass cover, pushing
its rear edge firmly into the rear
frame channel and gently lowering
the front into place.
I
,
I
