Light bulb
replacement
A light bulb and socket are
located at the top of the fresh food
compartment. A flexible shield
surrounds the lamp to help prevent
accidental breakage.
Light
press both sides
To replace the light bulb, unplug
the refrigerator’s power cord plug
from the wall outlet. Press
sides
of the light shield, near the front,
release the locking tabs and
the shield to swing down.
When you goon
vacation
For extended vacations or absences,
shut off power to refrigerator,
turn the numbered control to
position, and clean interior with
baking soda solution of one
tablespoon of soda to one quart
of water. Wipe dry. To prevent
odors, leave open box of soda in
refrigerator. Leave doors open.
For shorter vacations, remove per-
ishable foods and leave controls at
regular settings. However, if room
temperature is expected to drop
below
follow same instruc-
tions as for extended vacations.
When you move
Disconnect power cord from wall
outlet and remove all food. Follow
defrosting instructions (see page 9),
then clean and dry the interior.
Sponge out defrost water pan (see
page 10) to prevent spillage.
Secure
loose items such as
shelves, storage pan and ice trays
by taping them securely in place
to prevent damage.
Be sure refrigerator stays in
upright
position only
during actual moving
and in van.
must be
secured in van to prevent move-
ment. Protect outside of refrig-
erator with blanket.
Unscrew burned-out bulb and
replace it with a standard
appliance bulb. Then push light
shield up and press sides until tabs
lock into slots above.
11
.
Содержание CTA13
Страница 14: ...14 ...
