Ice & Chilled Water
(continued)
To Stop Dispensing
Release pressure from cradle and
withdraw slowly to catch last bits
ice or drops of water.
To Remove Ice Cube
Storage Bin...
Some slight dripping may occur
following dispensing of crushed
ice or chilled water. If excessive,
the spill should be wiped dry
immediately.
Do not pour water in spill shelf
because it is not
pour it in the kitchen sink. The
shelf and its grille should be
cleaned regularly according to
instructions on page 13.
If Ice Clumps Form in
Storage Bin...
The
ejects cubes in
groups of eight, and it is normal for
several cubes to be joined together.
However, infrequent usage of ice
can cause ice clumps to form in
the storage bin, resulting in
temporary malfunction of the
dispenser mechanism.
If this happens:
. Remove storage bin from freezer
compartment.
. Break up ice clumps with
fingertip pressure and discard
remaining clumps.
. Replace bin before remaining
cubes melt and fuse together.
I
Lift the left corner to free the bin
from the
and
the bin
straight out while supporting it at
front and back.
To Replace Ice Cube
Storage Bin
the bin back until the tab
on the bin locks into the slot in
the
Rotate
Mechanism
If bin does not go all the way back,
remove it and rotate the drive
mechanism 1/4 turn. Then push bin
back again until the tab on the bin
locks into the slot in the shelf.
8
If Ice Is Not Used
Frequently...
“Old” ice cubes will become
cloudy and taste stale. Empty ice
storage bin periodically and wash it
in lukewarm water. Be sure to allow
storage bin to cool before replacing
it—otherwise ice cubes will stick
to the metal auger.
Move
Feeler
Arm to OFF (up) Position
When...
.
Home water
is to be
turned off for several hours.
. Ice storage bin is to be removed
for a period of time.
. Going away on vacation, at which
time you should also turn off the
valve in the water
line to
your refrigerator.
If This Is Your First
hear occasional sounds
that may be unfamiliar. These are
normal
sounds and are
not cause for concern.
