To Remove Drawers
1. Remove
from the shelf
above the Sealed and Fresh drawer
take out the shelf. Take food off
the glass cover and out of the drawer.
2. Put your fingers behind the
gasket at the rear of the drawer and
pull forward. Remove the gasket.
3. Pull the drawer partway out.
Reach in, push the rear of the glass
up; at the same time, push it back
until it clears front-corner retainers.
4. Tilt and
the cover.
1“
------
,,,
.-.
.—.
i
‘
-
“1
/–
5. Pull
forward, lift the
front to clear stops, and remove the
drawer. If the refrigerator door
doesn’t open completely, pull the
drawer out until it hits the door.
Then lift the drawer up until it is
higher than the drawer supports,
tilt it and take it out.
6. If tape holds Convertible Meat
Pan cover to drawer supports, remove
the tape. Pull drawer partway out.
Reach in, push the rear of the glass
up and, at the same time, back, until
it clears front-corner retainers.
7. Tilt and remove the
8. Tilt and remove the drawer.
After cleaning, replace in reverse
order.
When drawers and covers are back
in
reinstall the gasket at the
rear of the
and Fresh drawer.
Fit the end of the plastic drawer
support into the slot on the gasket,
with the rubber gasket flap facing
you. Make sure the gasket snaps
into place.
