•
Press the On/Off button
the indicator light relative to START/PAUSE
will flash slowly.
•
Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in
the wash cycle table.
•
Pull out the detergent dispenser drawer and add the detergent in the relevant compartments
•
Close the door
•
The machine automatically displays the default temperature and spin speed values for the selected cycle, or
the most recently used settings if they are compatible with the selected cycle.
•
Select the desired wash cycle.
•
Select the desired options.
•
Press the START/PAUSE
button to start the wash cycle; the relative indicator light will light up steady and
the door will lock.
symbol will turn off.
Pausing a cycle
To pause the wash cycle, press the START/PAUSE
button again, the indicator light will flash. If the
symbol is
lit, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the
START/PAUSE
button again.
Opening the door if necessary
Once a cycle starts, the
symbol turns off to signal that the door cannot be opened. While a wash cycle is running,
the door remains locked. To open the door while a cycle is under way, for example to add or remove garments, press
the START/PAUSE
button to pause the cycle; the indicator light will flash. If the
symbol is lit the door may be
opened. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE button to
continue to cycle.
Changing a running wash cycle
To change a wash cycle while it is in progress, pause the washer-dryer using the START/PAUSE button (the relative
indicator light will flash), then select the desired cycle and press the START/PAUSE button again. To cancel a cycle
that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch off.
At the end of the wash cycle
This will be indicated by the word “END” on the display; when the
symbol switches on, the door may be opened.
Open the door, unload the laundry and switch off the machine. If you do not press “ON/OFF”
button, the
