18
GB
Start-up and use
Starting the appliance
!
After transportation of the appliance, carefully place it in
an upright position and wait at least 3 hours before
connecting it to the electricity mains, to make sure it
operates as it should.
Clean the inside of the refrigerator well using warm
water and bicarbonate of soda before placing food
inside it.
The appliance comes with a motor protection control
system which makes the compressor start
approximately 8 minutes after being switched on.
The compressor also starts each time the power
supply is cut off whether voluntarily or involuntarily
(blackout).
Freezer Compartment
When the product is switched on the freezer compartment
is set to its default value of
-18°C
. We recommend that the
SUPER FREEZE
function is set (the freezer status bar
continues to display the set value) in order to accelerate
the cooling process of the compartment; when the inside
of the compartment has reached its optimal temperature
the function will be deactivated and the food may be
placed inside.
Refrigerator Compartment
When the appliance is switched on the refrigerator
compartment is set to its default value of
+5°C
. We
recommend that the
SUPER COOL
function is set (the
refrigerator status bar continues to display the set value)
in order to accelerate the cooling process of the
compartment. After a few hours it will be cool enough for
food to be placed inside.
Navigating the display
Setting the temperatures:
If the product is switched on, the refrigerator and freezer
status bars will indicate the temperatures set at that
moment. To change them, simply press the
and
buttons corresponding to the compartment for which you
wish to change the set temperature. More specifically,
each time one of the buttons is pressed the temperature is
increased or decreased by 1°, and the level of cold is
adjusted accordingly.The temperature values that may be
selected for the refrigerator compartment are +12°C,
+7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the
values that may be set for the freezer are -18°C, -19°C, -
120°C, -21°C, -22°C, -24°C and -26°C.
The temperatures are automatically set to
+5°C
for the
refrigerator compartment and
-18°C
for the freezer
compartment (these are standard food storage values.
When the
I Care
function is active, the appliance
automatically adjusts the temperatures according to the
conditions inside and outside the refrigerator; the
operation of this function is signalled by the text AUTO.
Whenever it is necessary to activate the
I Care
function
at temperatures that are different to the standard storage
values, the
I Care
button must be pressed as soon as
the function is activated and held down while the new
temperatures are set using the
and buttons. Under
these conditions, the temperatures may be set to 4°C,
5°C and 6°C for the refrigerator compartment and -18°C,
-19°C and -20°C for the freezer compartment.
When the
HOLIDAY
function is active the temperature
may not be adjusted, however the appliance adjusts itself
automatically so that the optimal settings for the situation
are used:
+12°C
for the refrigerator compartment and
-
18°C
for the freezer compartment. This function is
indicated by the text.
To activate and deactivate the functions simply press the
relevant button and the function status will be signalled
by the corresponding LED switching on or off.
Several functions (
SUPER COOL, SUPER FREEZE, ICE
PARTY, I CARE
) are incompatible with others
(
HOLIDAY
,...); remember that there is a pre-set order of
priority which will help you to use the product in the best
possible way.
When the
Ice Party
function has finished, press the
ICE
PARTY
button to stop the corresponding LED from
flashing and to silence the sound signal. This flashing and
sound signal indicates that the function is complete and
that the bottle should be removed from the freezer
compartment.
Child Lock
In order to activate the Child Lock function, the Child
Lock button must be pressed for 2 seconds; the
activation of the button lock is confirmed by a short beep
and the illumination of the corresponding LED.
To deactivate the function, press the Child Lock button
for 2 seconds; deactivation will be confirmed by a short
beep and by the corresponding LED switching off.
!
The FREEZER status bar is also used to indicate
an unusual temperature increase in the freezer
compartment (see Troubleshooting).
Содержание NMTP 1922 FW
Страница 12: ...12 I 195069168 01 04 2008 ...
Страница 24: ...24 GB 195069168 01 04 2008 ...
Страница 36: ...36 F 195069168 01 04 2008 ...
Страница 48: ...48 ES 195069168 01 04 2008 ...