2
GB
Installation
Before operating your new appliance please read this
instruction booklet carefully. It contains important
information concerning the safe operation, installation
and maintenance of the appliance.
Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning
Keep all packaging materials out of the reach of children.
It may present a choking or suffocation hazard (
see
Precautions and tips
).
The appliance must be installed by a qualified
professional in accordance with the instructions provided.
Incorrect installation may damage property or cause harm
to people or animals.
Built-in appliance
Use the appropriate cabinet to ensure that the appliance
functions properly.
The supporting surface must be heat-resistant up to
a temperature of approximately 100°C.
If the appliance is to be installed above an oven, the
oven must have a forced ventilation cooling system.
Avoid installing the hob above a dishwasher: if this
cannot be avoided, place a waterproof separation
device between the two appliances.
Depending on the hob you want to install, the
cabinet must have the following dimensions (
see
figure
):
Ventilation
To allow adequate ventilation and to avoid overheating
of the surrounding surfaces the hob should be positioned
as follows:
At a minimum of
40 mm from the
back panel and
600 mm from any
other vertical
surfaces.
So that a minimum
distance of 10 mm is
maintained between the
installation cavity and the
cabinet underneath.
Fixing
The appliance must be installed on a perfectly level
supporting surface.
Any deformities caused by improper fixing could change
the features and the operation of the hob.
560 +/- 1
490 +/- 1
48
590
520
560 +/- 1
490 +/- 1
48
574
504
10 mm
Distance to
keep between the
cut-out slot and
the cabinet
FRONT OF HOB
KITCHEN
WORKTOP
30
40
REAR SPRING ASSEMBLY
HOB FROM BELOW
40 mm min.
40mm
Opening of at least 5 mm
on the overall width
measurement of the surface.
Above an empty cabinet or a drawer
A space of at least 40 mm, or an opening of 5 mm on
the width measurement of the cabinet, should be created.
All manuals and user guides at all-guides.com
