GB
9
Setting the minute minder
!
The minute minder may be set regardless of whether the
oven is switched on or off. It does not switch the oven on
or off.
When the set time has elapsed, the minute minder emits a
buzzer that will automatically stop after 30 seconds or when
any active button on the control panel is pressed.
To adjust the minute minder, proceed as follows:
1. Press the
icon.
2. Set the desired time using the control dial.
3. Once you have reached the desired value, press the
icon again.
When the oven is switched off, the countdown appears on the
display. When the oven is on, the lit
symbol will remind
you that the minute minder is active.
To cancel the minute minder, press the
icon and use
the control dial to set the time to 00:00. Press
again.
The
icon will switch off to indicate that the minute minder
has been disabled.
Starting the oven
1. Press
to switch on the control panel. The appliance
buzzer sounds three times (ascending).
2. Press the
icon to select the desired manual cooking
mode. The cooking temperature and duration may be set.
Press the
icon to select the desired automatic cooking
mode. The cooking temperature and duration are both
set to default values. Only the duration may be adjusted
in accordance with the selected mode. The text “AUTO”
appears on the display to indicate that the temperature is
following a precise cooking profile. A delayed cooking cycle
may be programmed.
3. Press
to start the cooking mode.
4. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
5. When the preheating process has finished, a buzzer sounds
and all the preheating indicator lights show that this stage has
been completed: the food can then be placed in the oven.
6. During cooking it is always possible to:
- adjust the temperature by pressing the
icon, turning the
control dial and confirming by pressing
again (manual
modes only );
- set the duration of a cooking mode (
see Cooking Modes
);
- stop cooking by pressing the
icon. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
icon for 3 seconds.
7. If a blackout occurs while the oven is already in operation,
an automatic system within the appliance will reactivate the
cooking mode from the point at which it was interrupted,
provided that the temperature has not dropped below a
certain level. Programmed cooking modes which have not
yet started will not be restored and must be reprogrammed
(for example: a cooking mode has been programmed to
start at 20:30. At 19:30 a blackout occurs. When the power
supply is restored, the mode will have to be reprogrammed).
!
There is no preheating stage for the GRILL mode.
!
Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
!
Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the oven,
a cooling fan blows a stream of air between the control
panel and the oven door, as well as towards the bottom of
the oven door. At the beginning of the cleaning cycle, the
cooling fan operates at low speed.
!
Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or when
a cooking mode starts (
if enabled in the settings menu
).
When models featuring
LED INSIDE
technology begin
cooking, the LEDs on the door light up for improved
illumination of all cooking levels.
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the “residual heat” bar on the display lights
up to indicate high temperatures inside the oven cavity. The
individual segments of the bar switch off one by one as the
temperature inside the oven falls.
Demo mode
!
The appliance will not enter DEMO mode if the language
has not been selected beforehand.
The oven can operate in DEMO mode: all heating elements
are deactivated, and the controls remain operative.
To activate DEMO mode, switch off the oven and keep
the control dial turned clockwise while pressing
for 10
seconds. A buzzer sounds and the display shows “DEMO”.
To deactivate DEMO mode, keep the control dial turned
anticlockwise while pressing
for 3 seconds. A buzzer
sounds to confirm deactivation.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (language, tone, customised
durations, etc…). To carry out a reset, switch off the oven,
then press and hold 6
,
and
simultaneously
for 6 seconds. Once the restore procedure is complete, a
buzzer will sound. The first time the
icon is pressed, the
oven will behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the latest
European Directive on the limitation of power consumption
in standby mode. If no buttons are pressed for 30 minutes
and the control panel/door lock has not been activated, the
appliance automatically reverts to standby mode. The ECO
