3-digit LED screen:
Indicates unit info (bank number, MIDI
messages, etc.). Please check Screen
Display section for details.
EXP/CTRL 1/2:
1/4” TRS inputs, for connecting
external expression pedals/momentary
footswitch controllers.
Perfect for Hotone Ampero Press or
Ampero Switch.
A
B
MIDI IN:
Standard 5-pin MIDI input jack,
for receiving MIDI messages.
1 2 3 4
USB:
USB 2.0 Type-B jack, for USB MIDI control.
Ampero Control can be powered by the USB port.
MIDI OUT/THRU:
5-pin MIDI output jack,
for sending MIDI
messages.
Panel
Programmable Footswitch (FS) 1-4:
For sending MIDI messages depending on your needs.
Use Ampero Control app for detailed settings.
Tap FS 1+2: Bank down
Tap FS 3+4: Bank up
Hold FS 2+3: Enable Bluetooth Pair Mode
Hold FS 4 while powering up:
Enable Expression Pedal
Calibration Mode
The contents of this manual
are subject to change without notice.
Power Supply Connection:
Power supply input
(9-18V DC center negative).
Specifications
Compatible Exp Pedal Pot Resistance
:
Max. 10k
Ω
Power Requirement:
9-18V DC center negative or 5V DC (USB)
Current Consumption: Max. 100mA
Dimensions:
258.5mm (W)
×
55.5
mm (D)
×
49mm (H)
Weight: 440g
技术要求：
157g
铜板纸，
273*124mm
，四色印刷，覆哑膜，二折页
Thank you for purchasing a Hotone product.
Scan the QR code for the full manual and app download links.
感谢您购买
Hotone产品
，
请扫描右侧⼆维码获取完整说明书及配套软件下载地址。
www.hotoneaudio.com/support
We recommend you update the latest firmware/software for the best possible experience.
我们建议您及时升级到最新固件/软件以获得最佳的⽤⼾体验。
FCC regulation warning (for USA)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. This device and its antenna(s) must not be
co-located or operating in conjunction with any other
antenna transmitter. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and
receiver.
·Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV
technician for help.
FCC ID:2AHJSEC-4
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with
minimum distance 20cm
between the radiator & your body.
