HotBrick VPN 6000, Руководство пользователя

Страница: 22 / 33

- HotBrick VPN 6000 user manual -
instead. Be sure to have the connection details provided by your ISP at hand, because
you will need these in the next screen.
Some Internet providers may have you authenticate before connecting to the Internet,
preferring to use PPTP or PPPoE. If you have such a connection, choose “PPTP/PPPoE”.
Like with a Static/NAT connection, setting up a PPTP/PPPoE Internet connection will
require connection details provided by your ISP.
When in doubt about the type of Internet connection to choose, please contact your
ISP.
➔
Select the type of Internet connection appropriate to your situation.
➔
Press “next” to continue.
Setting up WAN1 using DHCP
The easiest way to connect WAN1 to the Internet is using DHCP. Generally, when
choosing DHCP, no further settings are required for an Internet connection. After
pressing “next” you will directly be offered the opportunity to set up your WAN2
interface (fall back Internet connection).
Setting up WAN1 using a Static/Nat connection
When using a single static IP address or a routed subnet for your network connection,
you will have been provided with an IP number, a net mask and a default gateway by
your ISP. After choosing “Static/Nat” as type of Internet connection, the next screen
will offer the opportunity to enter this data.
➔
Enter the IP address, net mask and gateway address.
If you are in any way unsure about the correct number to enter, please contact your
ISP for confirmation.
revision 193 (05-01-20) page 22 / 33