HotBrick Dual WAN Firewall VPN 1400/2 Скачать руководство пользователя

Страница: 57 / 76

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966

Management Assistant – Email Alert

This feature will send a warning Email to inform the system administrator that one of the WAN ports
is disconnected.

Enable/Disable Email Alert



Enable –

This enables Email Alert to send a warning email when a WAN port disconnects.



Disable –

This disables Email Alert so no warning email is sent when a WAN port disconnects.

Email Alert Configuration



Email Sender Address-

This is the email address that sends a warning email to a recipient.

The email informs the recipient to check if there is a problem with a WAN port or not.



Email (SMTP) Server Address –

This is the email server a warning email will be sent to If the

setting is enabled. For example:

mail.domain.com.



Email(SMTP) Server User Name –

This is the user name of the email sender for authentication

(optional).



Email(SMTP)Server Password -

This is the user password.



Email Recipient Address -

This is the email recipient address ([email protected]).

If one of the WAN port disconnects, the email message will be sent to this recipient.

Excessive Ping Notification -

This function prevents ICMP packet attacks from either the WAN or

LAN on the unit. These packets will be dropped if the ping times exceed the threshold value, Ping
Before Notification, and will send an e-mail to notify the administrator if Email Alert is enabled.



Ping Attack Notification -

By default this feature is Disabled.

Содержание Dual WAN Firewall VPN 1400/2













































































Результаты поиска

Содержание Dual WAN Firewall VPN 1400/2

Отзывы:

Похожие инструкции для Dual WAN Firewall VPN 1400/2

Бренды по названию

Популярные бренды

HotBrick Dual WAN Firewall VPN 1400/2, Руководство пользователя

Результаты поиска

Содержание Dual WAN Firewall VPN 1400/2

Отзывы:

Похожие инструкции для Dual WAN Firewall VPN 1400/2

Бренды по названию

Популярные бренды