Page 15
TOOLS MENU
The TOOLS menu is one of the main menus on the control panel. Within
the TOOLS menu are seven submenus, which consists of; Temp Lock,
Spa Lock, Light, Econ or Summer Timer, Filter 1, Filter 2, LCD and Exit.
To enter onto the TOOLS menu, scroll through the main menus using
the MODE (
or
) button until TOOLS is displayed. Press the
(+)
button to enter into the TOOLS submenu, use the MODE (
or
)
button to scroll through the submenus. Once the desired submenu is
displayed, press the
(+)
button to activate that submenu. To leave the
TOOLS submenu, scroll through the submenu using the MODE (
or
) button until EXIT is displayed, then press the
(+)
button to exit the
submenu.
LOCKING FEATURES
The two locking features, SPA LOCK and TEMPERATURE LOCK,
are enabled from the control panel by pressing the MODE (
or
)
button until TOOLS is displayed. Then press the
(+)
button to enter the
TOOLS submenus. Use the MODE (
or
) button to scroll through
the submenus to get to the locking features. Once enabled, a lock will
remain active until the specific button combination is applied to disable
the lock. Even if power is disconnected from the spa and soon thereafter
reapplied (such as in a power outage) the lock will remain in place.
TEMPERATURE LOCK
The TEMPERATURE LOCK feature deactivates
the temperature control function of the control
panel. TEMPERATURE LOCK is most often
used by people who do not want others to
tamper with or change the set temperature of the spa water. TEMPERATURE
LOCK is a submenu of the TOOLS menu
To activate the TEMPERATURE LOCK, press the MODE (
or
)
button in the TOOLS submenu until the TLOK- symbol is displayed on
the screen. Press the
(+)
button to activate the TEMPERATURE LOCK
feature (TLOK+).
When the TEMPERATURE LOCK is activated, the JETS, LIGHTS
and any other features your spa may have will operate normally, and
the temperature setting can be viewed but can NOT be changed. If a
temperature button is pressed, TLOK will display for several seconds,
then turns off.
To deactivate the TEMPERATURE LOCK, press the MODE (
or
)
button in the TOOLS submenu until the TLOK+ symbol is displayed
on the screen. Press the
(-)
button to deactivate the TEMPERATURE
LOCK feature.
SPA LOCK
The SPA LOCK feature deactivates all of the
functions of the control panel. It is generally
used to prevent unwanted use of the spa. The
SPA LOCK menu is a submenu of the TOOLS
menu.
To activate the SPA LOCK, press the MODE (
or
) button in
the TOOLS submenu until SLOK- is displayed on the screen. Press the
(+)
button to activate the SPA LOCK feature.
When the SPA LOCK is activated, the buttons for the jets, temperature
control, light, and any other features your spa may have are deactivated.
If Jets, Light button, or
(+)
or
(-)
button is pressed, the SLOK will display
for several seconds, then turns off.
To deactivate the SPA LOCK, press the MODE (
or
) button in
the TOOLS submenu until the SLOK+ symbol is displayed on the
screen. Press the
(-)
button to deactivate the SPA LOCK feature.
LOCK OVERRIDE
The Lock Override feature is for spa users who normally keep the
set temperature locked. Should the user wish to lock all spa controls
temporarily, the spa lock can be applied over an already-applied
temperature lock. Then, when the spa lock is removed, the temperature
lock will remain on to prevent unwanted tampering with the set
temperature.
LIGHT - MULTI-COLOR MENU CONTROLS
(
TEMPO
,
RELAY
&
RHYTHM
ONLY)
Your spa lights can display a variety of different colors as well as run
through a continuous sequence of colors (loop) at different speeds. To
activate this function the following is required:
Press the MODE (
or
) button to scroll to the TOOLS screen. Once
displayed, press the
(+)
button to enter the TOOLS submenu. Press the
MODE (
or
) button to scroll to LIGHT screen, press the
(+)
button to
enter DIM, screen. Press the
(+)
button or
(-)
button in the DIM screen to
adjust the brightness of the lights. Press the MODE (
) button to scroll
to Color screen. Press the
(+)
button or
(-)
button in the COLOR screen
as many times as desired to toggle through the different light colors.
Press the MODE (
) button to scroll to Loop screen. Press the
(+)
button or
(-)
button in the LOOP screen to select a continuous sequence
of colors, the higher the loop number the faster the color sequence will
run. Press the MODE (
) button to scroll to EXIT screen. Press the
(+)
button in the EXIT screen to exit the LIGHT menu.
If the light is turned off while in the LOOP or COLOR mode, the same
mode will exist when the light is reactivated. You will see a flashing light
icon whenever your LOOP mode and light are turned on.
SUMMER MODE (OPTIONAL ON SX & TX
MODELS ONLY)
If your spa is equipped with a circulation pump it will also have a
Summer Mode timer. The Summer Mode timer can be activated during
extremely hot summer months if it becomes difficult to maintain water
temperatures low enough for comfort. Upon switching to the ON mode,
the circulation pump (which can add heat to the water through normal
operation) and heater will immediately shut down for the next eight
hours. Additionally, the summer mode display on the control panel
will activate and remain active for as long as the summer mode is on.
Following this eight hour period, the circulation pump and heater will
automatically re-start and will operate normally for the next sixteen
hours. The circulation pump and heater will continue to turn off for an
eight hour period every day that the timer remains in the ON position.
In this way, the amount of heat transferred to the spa water will be
minimized. When the outside temperatures begin to cool, the Summer
Mode timer should be turned to the OFF position (the summer mode
icon on the main display will shut off). This is the efficient 24 hour
circulation mode that keeps the heater operation and operating costs to
a minimum during colder/heavier usage months.
NOTE:
Whenever power is disconnected and then reconnected to
the spa, the Summer Mode timer will reset starting with the 8-hour
shutdown mode. If a different 8-hour shut down time is desired,
deactivate the Summer timer Mode, then reactivate at the beginning of
the desired eight-hour shut down time.
IMPORTANT:
The Summer Mode will not lower the spa’s water
temperature below the ambient air temperature.
Operating Instructions
