Hostess HM250A, Инструкция по эксплуатации, Страница: 2 / 8

2
IMPORTANT
When using the appliance, please prepare everything first (clean the pot, fit the blender, fill with beverage)
before placing the pot on the base unit.
Please keep the heating disc clean. Don’t leave anything on the surface of the heating element or on the
bottom of the pot.
OPERATION
1. Frothing Cold or Warm Milk
Fig.1 Remove the lid.
Fig.2 Press the blender firmly onto the spigot in the bottom of the pot. Check that it rotates freely.
Fig.3 Pour the required amount of milk into the pot, up to the 250ml Max level.
(If more milk is poured into the pot you risk the beverage overflowing!)
Fig.4 Replace the lid.
Fig.5 Place the pot onto the base unit. Plug in the appliance and switch on the mains supply.
Fig.6 To froth cold milk select the button marked . The indicator light will be come on and the blender
will start to rotate the milk. The appliance will automatically switch off after approximately 3½ minutes.
If you want to stop the appliance at any time, press the button a second time.
To make warm frothy milk select the button marked . The indicator light will come on and the
blender will start to rotate the milk. After approximately 1½ - 4 minutes the milk will have reached the
pre-set temperature (~60°C) and the appliance will automatically switch off. The hot luscious milk
foam can now be poured into your coffee cup. If you want to stop the appliance at any time, press the
button a second time.
Note: If the button marked is pressed again whilst the Milk Frother is still hot, then it will
automatically run for a further 3 minutes. (approximately).