HL6200 SERIES
F.
CABINET ITEMS
1.
Magnetic catch 111 is a push-fit in front top panel 109.
2.
To remove front top panel 109, remove both sliding table tops completely (see A.1.) and magnetic catch
111. Drill out the rivet at each end of the front slide panel using a 3mm bit. Use extreme care when
drilling. Withdraw leg top caps 108, and then remove the front top panel assembly. Refit in reverse order.
3.
Castor wheels 116 are a push-fit onto castor wheel inserts 117. The castor wheel inserts are a push-fit
into the cabinet. Remove by prising out with care.
THEORETICAL WIRING DIAGRAM
L
E
CUPBOARD
TOP
(MIDDLE)
NEON ELEMENT
ELEMENT
N
SPECIFICATION
Voltage
230 V a.c. 50 Hz
Loading 355
W
Cord length
2 m
Pre-heat time
30 minutes approx
Finish
See
text
Dimensions (approx) 725mm W x 380mm D x 695mm H
SERVICE INFORMATION
The elements used in this appliance are of the adhesive variety and cannot be removed easily. For this reason,
elements and plates are supplied as complete assemblies.
