background image

STEP 15

Notice there is a cam system installed in the 
rollers that will allow adjustment for small 
outages. Using level adjust top rollers with 
provided spanner wrench and then snug bottom 
roller to rail to ensure the door glass will not 
come off track. See figure 20.

STEP 17

Install recessed finger pull (Part number 50H) using gaskets provided. See 
figure 22.

Note: The recessed pull 
consists of five pieces. When 
mounting, try to center the 
threaded middle section 
between the two end rings.

STEP 18 (Optional)

Polycarbonate is provided as an option for the edge of the door to help 
seal against wall.

STEP 19 (Optional)

Silicone the inside and outside of the stationary panel, both wall and curb.

STEP 16
IMPORTANT: GLASS STOPS MUST BE ADJUSTED PROPERLY 
TO KEEP GLASS FROM STRIKING WALL AND/OR WALL 
CONNECTORS  AND BREAKING.  

Adjust glass stops (Part number 503F) for required stopping distance 
for glass door. See figure 21.

Updated Dec 1, 2012

Cardinal Shower Enclosures are manufactured by Hoskin & Muir, Inc.

Page 74

INSTALLATION INSTRUCTIONS

FIGURE 21

FIGURE 20

FIGURE 22

Отзывы: