58
[d] TOP PANEL
1) Remove the front panel (upper).
2) Unscrew and unhook the rear of the top panel, and lift it off.
3) To refit the top panel, check that the insulation panel is securely in place before
hooking the backside square hole of the top panel on the rear of the cabinet.
[e] AIR GUIDE
The air guide fitted with a vibration damper on backside is located at the front of the
condenser to prevent noise from the machine compartment.
1) Remove the four machine screws securing the air guide to the cabinet.
2) To refit the air guide, reverse the above procedure.
[f] REFRIGERATOR COVERS
Auxiliary code: K0 or earlier
The refrigerator covers (A) and (B) are located on top of the machine compartment as
partitions and fitted with the control box.
1) Remove the air guide.
2) Remove the four machine screws securing the refrigerator cover (A), and take it off.
3) Remove the machine screw securing the control box, and pull out the control box.
4) Remove the two machine screws securing the refrigerator cover (B), and take it off.
5) To refit the refrigerator covers, reverse the above procedure.
Auxiliary code: K1 or later
The refrigerator cover is located on top of the machine compartment as a partition and
fitted with the control box.
1) Remove the air guide.
2) Remove the two machine screws securing the control box, and pull out the control
box.
