8
III. INSTALLATION AND OPERATING INSTRUCTIONS
III. INSTALLATION AND OPERATING INSTRUCTIONS
III. INSTALLATION AND OPERATING INSTRUCTIONS
III. INSTALLATION AND OPERATING INSTRUCTIONS
III. INSTALLATION AND OPERATING INSTRUCTIONS
1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION
1. CHECKS BEFORE INSTALLATION
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
1. Remove shipping carton, tape(s) and packing. If packing material is left in
the ice dispenser, it will not work properly.
2. Ensure all components, fasteners and thumbscrews are securely in place.
1) Be careful not to damage the panels when installing the ice dispenser.
2) Remove the package containing accessories.
3) Check that a 1A and a 0.5A spare fuse for the Transformer are provided in the small vinyl
bag.
4) Check that refrigerant lines do not rub or touch lines or other surfaces, and that the fan
blade moves freely.
5) Check that the compressor is snug on all mounting pads.
6) See the Nameplate on the upper left hand side of the Rear Main Panel, and check that
your voltage supplied corresponds with the voltage specified on the Nameplate.
2. HOW TO REMOVE PANELS - See Fig. 2
2. HOW TO REMOVE PANELS - See Fig. 2
2. HOW TO REMOVE PANELS - See Fig. 2
2. HOW TO REMOVE PANELS - See Fig. 2
2. HOW TO REMOVE PANELS - See Fig. 2
a) Front Panel .............. Remove the screw.
Lift up and off.
b) Top Panel ................ Pull toward you and
lift off.
c) Rear Panel ............... Remove the screws
and pull off.
d) Side Panels................Remove the screws
and pull off.
e) Apron Panel...............Remove the screws
and pull off.
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Fig. 2
a
b
c
d
d
e
