37
* Thick frames show common cases.
[Temporary measure (Stop dispensing beer)]
• Lift up operation panel unit.
• Close keg coupler.
Beer tap lever is touching a part in operation panel unit and prevents operation panel unit from
going down.
Defective seal gasket in beer tap
valve shaft.
Disassemble beer tap and fit seal
gasket to valve shaft.
Beer tap sliding failure (clean even if
it slides normally).
Beer tap seized.
Disassemble and clean beer tap.
* See instruction manual
Manually check beer tap for proper operation.
If anything is wrong, replace defective parts.
* See “12. VALVE SHAFT” for valve shaft disassembly.
See “(24) Operation panel unit will not go down
completely”.
See “(23) Display shows error” to determine the cause.
(20) Beer will not stop
Yes
No
Yes
No
Yes
No
Yes
