1) Determine the Intended Application and Appropriate Attachment System Configuration for Your Application
a) Polishing/Waxing/Buffing/Deoxidation/Cutting/Compounding/Swirl Removal
• Automotive paints and gel coats on cars, buses, boats, RVs, aircraft, and more.
• ProGuard™ Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision™ adapters for 2-sided pads
b) Metal Polishing
• Aluminum, stainless steel and chrome.
• ProGuard Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision adapters
c) Scrubbing Carpets/Upholstery/Fabrics
• Interior and exterior applications.
• Scrub brushes, ProGuard Orbital Backing Plates with foam pads and pad covers, heads with Rubber Pad Holders with foam pads and pad covers, DoublePrecision
2-sided pads with pad covers
d) Other Miscellaneous Applications.
• Hockey arena boards: FastCut™ Discs on ProGuard Orbital Backing Plates or on heads with Rubber Pad Holders
• Tile and grout cleaning: Scrub brushes
• Headlight restoration: ProShine™ Discs and Interface pads on ProGuard Orbital Backing Plates, heads with Rubber Pad Holders or DoublePrecision 2-sided pads
(uses DoublePrecision Interface pad).
e) Refer to the application chart (on the back cover) for additional information and product application suggestions.
Backing Plates and Attachment Alternatives
f) ProGuard Orbital Backing Plates (79-112-5/16)
• Featuring a low profile for improved control and a non-marking bumper for safe operation. The advanced
design ensures against de-lamination with the plate-integrated hook field, provides faster pad centering
and is perfect for quick and easy pad changes. For use with 72- series foam and wool pads.
g) Rubber Pad Holders (79-101)
• Durable, long-lasting Pad Holders fit directly over the Orbot Micro Head Assemblies to hold 72- Series
pads via Velcro hook face.
h) Head Assemblies (60-055)
• The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool
pads permanently attached to a rubber boot). Rubber Pad Holders fit directly over the Head Assemblies.
i) Quick Connect Adapters (79-725-5/16)
• Center pads easily and save time by simply snapping the pads in place. System replaces Orbot Micro
heads to hold 77- Series Double-Precision, two-sided pads.
j) Scrubbing Brushes (76-xxx)
• Genuine Orbot scrubbing brushes have integral connectors which screw directly into the Orbot Micro
replacing the heads. By simply attaching two Orbot Brushes you can clean carpet, upholstery, tile, grout
and more.
k) ProShine Interface Pad (72-920, 77-920)
• Cushion backing plate for ProShine abrasive discs. Interface pads improve performance by allowing the
sanding disc
Configure the Vibration Elimination System (VES)™ Counterweights on Your Polisher.
l) When new, your polisher will have Orbot Micro exclusive VES counterweight system but may have no VES
weighted insert installed. You will need to install the appropriate weighted insert then install whichever attachment
you will be using: ProGuard OBP, Rubber Pad Holders, Brushes, or DoublePrecision Adapters.
m) With air supply hose not connected, lay the polisher upside-down on your lap, a bench or other flat surface.
n) Determine the attachment system configuration that you intend to use (see section 1 above)
o) Select the appropriate VES weighted insert from the table below.
p) Thread the weighted insert into the counterweight and hand tighten using the 7/32” L-hex key (included).
q) IMPORTANT! Tighten VES weighted insert firmly by attaching the 5/8” flat wrench (included) to the counterweight’s
threaded nut style fitting, and turn counterclockwise until you make contact with the L hex key. Use the flat wrench
pivoting on hex wrench to prevent counterweight from turning while tightening the weighted insert. Turn the L hex
key clockwise to tighten VES weighted insert firmly. Do not overtighten.
Attachment System:
ProGuard™ Orbital
Carpet And Scrub Brushes or
Rubber Pad Holders or
Backing Plates
DoublePrecision Adapters
Bonnets over Head Assemblies
Description (part #):
6.5g Weight, Blue (20-072)
18.75g Weight, Silver, 1 Stripe
32g Weight, Yellow, 2 Stripes(20-078)
Weighted Insert
(Top And Side Views)
Why Low Vibration Is Important:
Operators face significant risk of muscle, joint and nerve damage caused by the hand-arm vibration of many power tools. By reducing the amount
of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as described in the ISO 5349-1:2001 standard, Mechanical vibration --
Measurement and evaluation of human exposure to hand-transmitted vibration. Orbot Micro is designed to minimize vibration.
Table 1: Adjustable VES Counterweight Application Table
ORBOT MICRO SET-UP
5
5
CYCLO POLISHER SET-UP
1) Determine the Intended Application and Appropriate Attachment System Configuration for Your Application
a)
Polishing/Waxing/Buffing/Deoxidation/Cutting/Compounding/Swirl Removal
Automotive paints and gel coats on cars, buses, boats, RVs, aircraft, and more.
ProGuard™ Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision™ adapters for 2-sided pads
b)
Metal Polishing
Aluminum, stainless steel and chrome.
ProGuard Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision adapters
c)
Scrubbing Carpets/Upholstery/Fabrics
Interior and exterior applications.
Scrub brushes, ProGuard Orbital Backing Plates with foam pads and pad covers, heads with Rubber Pad Holders with foam pads and pad covers,
DoublePrecision 2-sided pads with pad covers
d) Other Miscellaneous Applications.
Hockey arena boards: FastCut™ Discs on ProGuard Orbital Backing Plates or on heads with Rubber Pad Holders
Tile and grout cleaning: Scrub brushes
Headlight restoration: ProShine™ Discs and Interface pads on ProGuard Orbital Backing Plates, heads with Rubber Pad Holders or
DoublePrecision 2-sided pads (uses DoublePrecision Interface pad).
e)
Refer to the application chart (on the back cover) for additional information and product application suggestions.
Backing Plates and Attachment Alternatives
f) ProGuard Orbital Backing Plates (79-112-5/16)
Featuring a low profile for improved control and a non-marking bumper for safe operation. The advanced
design ensures against de-lamination with the plate-integrated hook field, provides faster pad centering
and is perfect for quick and easy pad changes. For use with 72- series foam and wool pads.
g) Rubber Pad Holders (79-101)
Durable, long-lasting Pad Holders fit directly over the Cyclo Polisher Head Assemblies to hold 72- Series
pads via Velcro hook face.
h) Head Assemblies (60-055)
The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool
pads permanently attached to a rubber boot). Rubber Pad Holders fit directly over the Head Assemblies.
i) Quick Connect Adapters (79-725-5/16)
Center pads easily and save time by simply snapping the pads in place. System replaces Cyclo Polisher
heads to hold 77- Series Double-Precision, two-sided pads.
j) Scrubbing Brushes (76-xxx)
Genuine Cyclo scrubbing brushes have integral connectors which screw directly into the Cyclo Polisher
replacing the heads. By simply attaching two Cyclo Brushes you can clean carpet, upholstery, tile, grout
and more.
k) ProShine Interface Pad (72-920, 77-920)
Cushion backing plate for ProShine abrasive discs. Interface pads improve performance by allowing the
sanding disc
Configure the Vibration Elimination System (VES)™ Counterweights on Your Polisher.
l)
When new, your polisher will have Cyclo Toolmakers’ exclusive VES counterweight system but may have no VES
weighted insert installed. You will need to install the appropriate weighted insert then install whichever attachment
you will be using: ProGuard OBP, Rubber Pad Holders, Brushes, or DoublePrecision Adapters.
m)
With air supply hose not connected, lay the polisher upside-down on your lap, a bench or other flat surface.
n)
Determine the attachment system configuration that you intend to use (see section 1 above)
o)
Select the appropriate VES weighted insert from the table below.
p)
Thread the weighted insert into the counterweight and hand tighten using the 7/32” L-hex key (included).
q)
IMPORTANT!
Tighten VES weighted insert firmly by attaching the 5/8” flat wrench (included) to the counterweight’s
threaded nut style fitting, and turn counterclockwise until you make contact with the L hex key. Use the flat wrench
pivoting on hex wrench to prevent counterweight from turning while tightening the weighted insert. Turn the L hex
key clockwise to tighten VES weighted insert firmly. Do not overtighten.
Attachment System:
ProGuard™ Orbital
Backing Plates
Carpet And Scrub Brushes or
DoublePrecision Adapters
Rubber Pad Holders or
Bonnets over Head Assemblies
Description (part #):
6.5g Weight, Blue (20-072)
18.75g Weight, Silver, 1 Stripe
32g Weight, Yellow, 2 Stripes(20-078)
Weighted Insert
(Top And Side Views)
Table 1: Adjustable VES Counterweight Application Table
Why Low Vibration Is Important:
Operators face significant risk of muscle, joint and nerve damage caused by the hand-arm vibration of many
power tools. By reducing the amount of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as
described in the ISO 5349-1:2001 standard, Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration.
Cyclo Toolmakers’ machines are designed to minimize vibration.
5
CYCLO POLISHER SET-UP
1) Determine the Intended Application and Appropriate Attachment System Configuration for Your Application
a)
Polishing/Waxing/Buffing/Deoxidation/Cutting/Compounding/Swirl Removal
Automotive paints and gel coats on cars, buses, boats, RVs, aircraft, and more.
ProGuard™ Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision™ adapters for 2-sided pads
b)
Metal Polishing
Aluminum, stainless steel and chrome.
ProGuard Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision adapters
c)
Scrubbing Carpets/Upholstery/Fabrics
Interior and exterior applications.
Scrub brushes, ProGuard Orbital Backing Plates with foam pads and pad covers, heads with Rubber Pad Holders with foam pads and pad covers,
DoublePrecision 2-sided pads with pad covers
d) Other Miscellaneous Applications.
Hockey arena boards: FastCut™ Discs on ProGuard Orbital Backing Plates or on heads with Rubber Pad Holders
Tile and grout cleaning: Scrub brushes
Headlight restoration: ProShine™ Discs and Interface pads on ProGuard Orbital Backing Plates, heads with Rubber Pad Holders or
DoublePrecision 2-sided pads (uses DoublePrecision Interface pad).
e)
Refer to the application chart (on the back cover) for additional information and product application suggestions.
Backing Plates and Attachment Alternatives
f) ProGuard Orbital Backing Plates (79-112-5/16)
Featuring a low profile for improved control and a non-marking bumper for safe operation. The advanced
design ensures against de-lamination with the plate-integrated hook field, provides faster pad centering
and is perfect for quick and easy pad changes. For use with 72- series foam and wool pads.
g) Rubber Pad Holders (79-101)
Durable, long-lasting Pad Holders fit directly over the Cyclo Polisher Head Assemblies to hold 72- Series
pads via Velcro hook face.
h) Head Assemblies (60-055)
The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool
pads permanently attached to a rubber boot). Rubber Pad Holders fit directly over the Head Assemblies.
i) Quick Connect Adapters (79-725-5/16)
Center pads easily and save time by simply snapping the pads in place. System replaces Cyclo Polisher
heads to hold 77- Series Double-Precision, two-sided pads.
j) Scrubbing Brushes (76-xxx)
Genuine Cyclo scrubbing brushes have integral connectors which screw directly into the Cyclo Polisher
replacing the heads. By simply attaching two Cyclo Brushes you can clean carpet, upholstery, tile, grout
and more.
k) ProShine Interface Pad (72-920, 77-920)
Cushion backing plate for ProShine abrasive discs. Interface pads improve performance by allowing the
sanding disc
Configure the Vibration Elimination System (VES)™ Counterweights on Your Polisher.
l)
When new, your polisher will have Cyclo Toolmakers’ exclusive VES counterweight system but may have no VES
weighted insert installed. You will need to install the appropriate weighted insert then install whichever attachment
you will be using: ProGuard OBP, Rubber Pad Holders, Brushes, or DoublePrecision Adapters.
m)
With air supply hose not connected, lay the polisher upside-down on your lap, a bench or other flat surface.
n)
Determine the attachment system configuration that you intend to use (see section 1 above)
o)
Select the appropriate VES weighted insert from the table below.
p)
Thread the weighted insert into the counterweight and hand tighten using the 7/32” L-hex key (included).
q)
IMPORTANT!
Tighten VES weighted insert firmly by attaching the 5/8” flat wrench (included) to the counterweight’s
threaded nut style fitting, and turn counterclockwise until you make contact with the L hex key. Use the flat wrench
pivoting on hex wrench to prevent counterweight from turning while tightening the weighted insert. Turn the L hex
key clockwise to tighten VES weighted insert firmly. Do not overtighten.
Attachment System:
ProGuard™ Orbital
Backing Plates
Carpet And Scrub Brushes or
DoublePrecision Adapters
Rubber Pad Holders or
Bonnets over Head Assemblies
Description (part #):
6.5g Weight, Blue (20-072)
18.75g Weight, Silver, 1 Stripe
32g Weight, Yellow, 2 Stripes(20-078)
Weighted Insert
(Top And Side Views)
Table 1: Adjustable VES Counterweight Application Table
Why Low Vibration Is Important:
Operators face significant risk of muscle, joint and nerve damage caused by the hand-arm vibration of many
power tools. By reducing the amount of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as
described in the ISO 5349-1:2001 standard, Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration.
Cyclo Toolmakers’ machines are designed to minimize vibration.
5
CYCLO POLISHER SET-UP
1) Determine the Intended Application and Appropriate Attachment System Configuration for Your Application
a)
Polishing/Waxing/Buffing/Deoxidation/Cutting/Compounding/Swirl Removal
Automotive paints and gel coats on cars, buses, boats, RVs, aircraft, and more.
ProGuard™ Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision™ adapters for 2-sided pads
b)
Metal Polishing
Aluminum, stainless steel and chrome.
ProGuard Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision adapters
c)
Scrubbing Carpets/Upholstery/Fabrics
Interior and exterior applications.
Scrub brushes, ProGuard Orbital Backing Plates with foam pads and pad covers, heads with Rubber Pad Holders with foam pads and pad covers,
DoublePrecision 2-sided pads with pad covers
d) Other Miscellaneous Applications.
Hockey arena boards: FastCut™ Discs on ProGuard Orbital Backing Plates or on heads with Rubber Pad Holders
Tile and grout cleaning: Scrub brushes
Headlight restoration: ProShine™ Discs and Interface pads on ProGuard Orbital Backing Plates, heads with Rubber Pad Holders or
DoublePrecision 2-sided pads (uses DoublePrecision Interface pad).
e)
Refer to the application chart (on the back cover) for additional information and product application suggestions.
Backing Plates and Attachment Alternatives
f) ProGuard Orbital Backing Plates (79-112-5/16)
Featuring a low profile for improved control and a non-marking bumper for safe operation. The advanced
design ensures against de-lamination with the plate-integrated hook field, provides faster pad centering
and is perfect for quick and easy pad changes. For use with 72- series foam and wool pads.
g) Rubber Pad Holders (79-101)
Durable, long-lasting Pad Holders fit directly over the Cyclo Polisher Head Assemblies to hold 72- Series
pads via Velcro hook face.
h) Head Assemblies (60-055)
The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool
pads permanently attached to a rubber boot). Rubber Pad Holders fit directly over the Head Assemblies.
i) Quick Connect Adapters (79-725-5/16)
Center pads easily and save time by simply snapping the pads in place. System replaces Cyclo Polisher
heads to hold 77- Series Double-Precision, two-sided pads.
j) Scrubbing Brushes (76-xxx)
Genuine Cyclo scrubbing brushes have integral connectors which screw directly into the Cyclo Polisher
replacing the heads. By simply attaching two Cyclo Brushes you can clean carpet, upholstery, tile, grout
and more.
k) ProShine Interface Pad (72-920, 77-920)
Cushion backing plate for ProShine abrasive discs. Interface pads improve performance by allowing the
sanding disc
Configure the Vibration Elimination System (VES)™ Counterweights on Your Polisher.
l)
When new, your polisher will have Cyclo Toolmakers’ exclusive VES counterweight system but may have no VES
weighted insert installed. You will need to install the appropriate weighted insert then install whichever attachment
you will be using: ProGuard OBP, Rubber Pad Holders, Brushes, or DoublePrecision Adapters.
m)
With air supply hose not connected, lay the polisher upside-down on your lap, a bench or other flat surface.
n)
Determine the attachment system configuration that you intend to use (see section 1 above)
o)
Select the appropriate VES weighted insert from the table below.
p)
Thread the weighted insert into the counterweight and hand tighten using the 7/32” L-hex key (included).
q)
IMPORTANT!
Tighten VES weighted insert firmly by attaching the 5/8” flat wrench (included) to the counterweight’s
threaded nut style fitting, and turn counterclockwise until you make contact with the L hex key. Use the flat wrench
pivoting on hex wrench to prevent counterweight from turning while tightening the weighted insert. Turn the L hex
key clockwise to tighten VES weighted insert firmly. Do not overtighten.
Attachment System:
ProGuard™ Orbital
Backing Plates
Carpet And Scrub Brushes or
DoublePrecision Adapters
Rubber Pad Holders or
Bonnets over Head Assemblies
Description (part #):
6.5g Weight, Blue (20-072)
18.75g Weight, Silver, 1 Stripe
32g Weight, Yellow, 2 Stripes(20-078)
Weighted Insert
(Top And Side Views)
Table 1: Adjustable VES Counterweight Application Table
Why Low Vibration Is Important:
Operators face significant risk of muscle, joint and nerve damage caused by the hand-arm vibration of many
power tools. By reducing the amount of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as
described in the ISO 5349-1:2001 standard, Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration.
Cyclo Toolmakers’ machines are designed to minimize vibration.
5
CYCLO POLISHER SET-UP
1) Determine the Intended Application and Appropriate Attachment System Configuration for Your Application
a)
Polishing/Waxing/Buffing/Deoxidation/Cutting/Compounding/Swirl Removal
Automotive paints and gel coats on cars, buses, boats, RVs, aircraft, and more.
ProGuard™ Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision™ adapters for 2-sided pads
b)
Metal Polishing
Aluminum, stainless steel and chrome.
ProGuard Orbital Backing Plates, heads with Rubber Pad Holders, or DoublePrecision adapters
c)
Scrubbing Carpets/Upholstery/Fabrics
Interior and exterior applications.
Scrub brushes, ProGuard Orbital Backing Plates with foam pads and pad covers, heads with Rubber Pad Holders with foam pads and pad covers,
DoublePrecision 2-sided pads with pad covers
d) Other Miscellaneous Applications.
Hockey arena boards: FastCut™ Discs on ProGuard Orbital Backing Plates or on heads with Rubber Pad Holders
Tile and grout cleaning: Scrub brushes
Headlight restoration: ProShine™ Discs and Interface pads on ProGuard Orbital Backing Plates, heads with Rubber Pad Holders or
DoublePrecision 2-sided pads (uses DoublePrecision Interface pad).
e)
Refer to the application chart (on the back cover) for additional information and product application suggestions.
Backing Plates and Attachment Alternatives
f) ProGuard Orbital Backing Plates (79-112-5/16)
Featuring a low profile for improved control and a non-marking bumper for safe operation. The advanced
design ensures against de-lamination with the plate-integrated hook field, provides faster pad centering
and is perfect for quick and easy pad changes. For use with 72- series foam and wool pads.
g) Rubber Pad Holders (79-101)
Durable, long-lasting Pad Holders fit directly over the Cyclo Polisher Head Assemblies to hold 72- Series
pads via Velcro hook face.
h) Head Assemblies (60-055)
The original backing plate for Rubber Pad Holders or foam and wool bonnets (71- series foam and wool
pads permanently attached to a rubber boot). Rubber Pad Holders fit directly over the Head Assemblies.
i) Quick Connect Adapters (79-725-5/16)
Center pads easily and save time by simply snapping the pads in place. System replaces Cyclo Polisher
heads to hold 77- Series Double-Precision, two-sided pads.
j) Scrubbing Brushes (76-xxx)
Genuine Cyclo scrubbing brushes have integral connectors which screw directly into the Cyclo Polisher
replacing the heads. By simply attaching two Cyclo Brushes you can clean carpet, upholstery, tile, grout
and more.
k) ProShine Interface Pad (72-920, 77-920)
Cushion backing plate for ProShine abrasive discs. Interface pads improve performance by allowing the
sanding disc
Configure the Vibration Elimination System (VES)™ Counterweights on Your Polisher.
l)
When new, your polisher will have Cyclo Toolmakers’ exclusive VES counterweight system but may have no VES
weighted insert installed. You will need to install the appropriate weighted insert then install whichever attachment
you will be using: ProGuard OBP, Rubber Pad Holders, Brushes, or DoublePrecision Adapters.
m)
With air supply hose not connected, lay the polisher upside-down on your lap, a bench or other flat surface.
n)
Determine the attachment system configuration that you intend to use (see section 1 above)
o)
Select the appropriate VES weighted insert from the table below.
p)
Thread the weighted insert into the counterweight and hand tighten using the 7/32” L-hex key (included).
q)
IMPORTANT!
Tighten VES weighted insert firmly by attaching the 5/8” flat wrench (included) to the counterweight’s
threaded nut style fitting, and turn counterclockwise until you make contact with the L hex key. Use the flat wrench
pivoting on hex wrench to prevent counterweight from turning while tightening the weighted insert. Turn the L hex
key clockwise to tighten VES weighted insert firmly. Do not overtighten.
Attachment System:
ProGuard™ Orbital
Backing Plates
Carpet And Scrub Brushes or
DoublePrecision Adapters
Rubber Pad Holders or
Bonnets over Head Assemblies
Description (part #):
6.5g Weight, Blue (20-072)
18.75g Weight, Silver, 1 Stripe
32g Weight, Yellow, 2 Stripes(20-078)
Weighted Insert
(Top And Side Views)
Table 1: Adjustable VES Counterweight Application Table
Why Low Vibration Is Important:
Operators face significant risk of muscle, joint and nerve damage caused by the hand-arm vibration of many
power tools. By reducing the amount of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as
described in the ISO 5349-1:2001 standard, Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted vibration.
Cyclo Toolmakers’ machines are designed to minimize vibration.
