horsch Pronto 40 DC, Руководство пользователя

Страница: 66 / 76

66 Pronto 40 DC Owner’s Manual – Ver. 1.0 04/2017
www.horsch.com
Maintenance Schedule
Maintenance Overview Pronto 40 DC
After the First Few Operating Hours Work Instructions Interval
Retighten all screw and plug-in
connections as well as the
hydraulic connections
Retighten the wheels.
Due to material settlements or e.g. paint residues
between screw connections even properly
tightened screw connections can become loose,
resulting in loose screw connections and leaking
hydraulic connections
In Operation
Pneumatic System
Hose installation Check leak tightness, cracks, buckling and routing prior to use
Distribution head Check for tightness, blockages prior to use
Motorized valves Check switching function prior to use
Cultivation Tools
Press wheels Check for condition, tightness and wear prior to use
Coulter Check for condition, tight fit and pre-load of discs prior to use
Discs of cultivation tools Check condition, tight fit and friction bearings for
free
running and leak tightness
prior to use
Scrapers on coulters and pressure rollers Check condition, setting and state of wear prior to use
PE marker Check for condition, tight seat, function, smooth prior to use
Harrow Check for condition, tightness, setting and state of prior to use
Screw adjustment Check for condition and smooth running prior to use
Hydraulic System
Hydraulic system and components Check for leaks, kinks in hoses, chafing and prior to use
Wheels / packer
Tires 7.50 - 16 Check condition, fastening (260 ft-lb), air
pressure (65 psi) prior to use
Packer shaft Check condition, fastening and smooth running prior to use
Front support wheels 400/60 - 15.5 Check condition, fastening (260 ft-lb), air
pressure (65 psi) prior to use
Machine
Road lighting equipment and warning plates Check condition and function prior to use
Warning and safety labels Check that they are in place and legible prior to use
At the End of the Season
Complete machine Carry out servicing and cleaning work
Complete machine spray with oil (cover rubber elements)
Friction bearings on cultivation tools Spray bearing with penetrating oil, e.g. WD 40
Piston rods on hydraulic cylinders Use penetrating oil or other means to protect
piston
After 3 - 5 Years
Hydraulic lines, lifting hydraulics Replace in acc. with machine directives, app. I EN
1533