horsch Joker RT Series Скачать руководство пользователя страница 20

20 | P a g e  

 

In These Operating Instructions 

The operating instructions distinguish between three different types of warning and safety instructions. 
The following graphic symbols are used: 

 
 

 

Important instructions! 

 
 

If there is a risk of injury! 
 

 

If there is a risk to life and limb! 
 

 
It is important that all the safety instructions contained in these operating instructions and all the warning signs on 
the machine are read thoroughly and understood prior to operation of the machine. 
 
Ensure that the warning signs are legible and replace any signs that are missing or damaged. 
 
These instructions must be followed in order to prevent accidents. Inform other users of the warnings and safety 
instructions and the location of this Owner’s Operators Manual. 
 
Do not carry out any operations which may affect the safe use of the machine. 
 

Authorized Operators

 

Only those persons who have been authorized and instructed by the operator may operate the  machine. 
Operators must be at least 16 years of age. 
 
The operator must hold a valid driving license.  They are responsible for third parties in the operating area. 
 
The person in charge must: 

 

Make the operating instructions available to the operator.  

 

Ensure that the operator has read and understood the operating instructions. 

 
The operating instructions are a key component of the machine. 

 

Protective Clothing

 

 
For operation and maintenance of this machine, you will need: 

 

Snug fitting clothing; no loose articles or strings. 

 

Safety gloves and goggles to protect against dirt and sharp edged machine parts. 

 

 

Содержание Joker RT Series



















































Отзывы: