horsch Joker MT-Series, Руководство пользователя

Страница: 24 / 54

24 | P a g e M T - S e r i e s J o k e r O w n e r ’ s M a n u a l
Extracting Stuck Machine Safety & Guidelines
Follow proper hooking and towing recommendations below for extracting stuck machines. If
damage is incurred to a machine during extraction due to improper procedure, any applicable
warranties may be void!
• Avoid wet, water logged and muddy ground conditions so as not to get stuck.
• Assess the situation around the stuck machine before attempting extraction.
•
Know when to call a professional for assistance in towing, lifting and extraction.
•
Use properly rated equipment – larger tractor/truck, tow ropes/straps, clevises, chains,
cables, etc.
•
Practice proper hooking and pulling techniques. Know where proper hooking points are at
on a machine so as not to damage the machine.
Do not hook or pull the machine from the transport axle or rear
packer system. Attach to a tie down location or the main frame. Do
not pull the machine sideways. Pull in a straight line as much as
possible.
• Pull force should not exceed normal operating conditions.
• Be aware of overhead power lines to avoid risk of serious damage and/or personal injury.
• Be aware of ditches or rocks to avoid tipping hazards of equipment.
• All bystanders are at risk of serious injury and must stand clear of extraction area for their
own personal safety.
•
Inspect machinery after recovery. Make any necessary repairs before putting the machine
back into service.
Service and Maintenance
• Ensure that regular tests and inspections are always carried out to schedule, as specified in
the operating instructions.
• Prior to performing maintenance and servicing work, ensure that the machine is positioned
on firm, level ground and that it is properly secured against rolling away.
• Prior to working on the electrical system, disconnect it from the electric power supply.
• Retighten screwed connections which had been loosened during servicing and maintenance
work.
• For further Service and maintenance information see following pages.
Do not wash new machines with a steam-jet or high-pressure cleaner.
The paint takes approximately 3 months to cure and could thus be
damaged if this time has not yet expired.