3 . 5 ” D U A L
S A T A
R A I D
S T O R A G E
I n s t a l l a t i o n
G u i d e
5
Mode Selection & Operation Guide
☆
Select HDD mode function by setting switch on PCB. Each mode must be started
from “Normal” mode. Please follow the steps as below to set HDD operation
mode.
☆
Backup data before formatting hard drives.
☆
The device can support two equal or unequal capacity hard drives.
RAID SW
SYS. Rst
JBOD
RAID 0
RAID 1
Normal
Mode
JBOD
RAID 0
RAID 1
Turn OFF power.
Set SW to Normal Mode.
1
Push “Sys Rst”.
2
Power ON.
3
Hold “Sys Rst” until
HDD Link LED turns ON
Turn OFF power.
Set SW to new HDD Mode.
1.
Push “Sys Rst”.
2.
Power ON.
3.
Hold “Sys Rst” until
HDD Link LED turns ON
