NDR User Guide
3
Before started:
Which Networking Environment suits you?
There are two methods to make your NDR working
(1)
DHCP OFF
If you do not have any network environment in the place that you
plan to install NDR, this option may apply.
You will need to install all LAN cables from end to end. Connect all
LAN cables to each IP cameras and LAN ports on NDR. Then, NDR will
configure everything for you.
(2)
DHCP ON (For advance user only)
If you do have network environment in your area, please make sure
you have DHCP server which is assigning IP address to each devices.
You can connect LAN cable to NDR’s WAN port, and then connect the
other side to router to get IP address.
For IP camera installation, you can install them to wherever inside the
LAN. Please note that NDR and IP cameras have to stay in the same
network segment. Otherwise, they will be unable to find each other.
