4
© 2001 Directed Electronics, Inc. Vista, CA
installation points to remember
■
Do not disconnect the battery if the vehicle has an anti-theft-coded radio.
■
If equipped with an air bag, avoid disconnecting the battery if possible. Many airbag systems will display a
diagnostic code through their warning lights after they lose power. Disconnecting the battery requires this
code to be erased, which can require a trip to the dealer.
■
Check with the customer on status LED location.
■
Remove the domelight fuse. This prevents accidentally draining the battery.
■
Roll down a window to avoid being locked out of the car.
■
The control module with siren should be placed in the engine compartment, away from heat sources and areas
that must be accessed for routine maintenance of the vehicle.
■
The control module should be placed with the siren portion facing down to prevent water damage to the unit.
■
Route the wires away from the unit and make sure they are securely fastened away from the moving parts of
the engine.
■
Place the antenna as high as possible and as straight as possible for maximum operating range.
primary harness (H1), 6-pin connector
______
______
______
______
______
______
RED
(+) 12V CONSTANT POWER INPUT
BLACK
(-) CHASSIS GROUND INPUT
BLUE/WHITE
(-) 2V LED OUTPUT
BLUE
(-) INSTANT TRIGGER INPUT
WHITE
(-) LIGHT FLASH OUTPUT
ORANGE
(-) 500 mA GROUND-WHEN-ARMED OUTPUT
H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
primary harness (H1) wiring diagram
locations for the control module/siren
before beginning the installation
