MAN0927-03 PAGE 4 Thermocouple module
4
NETWORK DATA
Consumed Digital Data
– This data is sent from the controller to the SmartBlock.
For typical
applications the I/O configuration setup in Cscape will automatically populate this data.
For more
advanced applications you may use NetPut functions to write this data. Please see the advanced
programming guide MAN0880 for more details.
Bit
Description
12
0 = 0.1
°
C 1 = 0.1
°
F
13-16
Filter
See programming Guide
17-20
Thermocouple Type Channel 1
21-24
Thermocouple Type Channel 2
25-28
Thermocouple Type Channel 3
29-32
Thermocouple Type Channel 4
65-68
Thermocouple Type Channel 5
69-72
Thermocouple Type Channel 6
73-80
Thermocouple Type Channel 7
77-80
Thermocouple Type Channel 8
0 = J, -210°C to 1200°C
1 = K, -200° to 1372°C
2 = N, -200°C to 1300°C
3 = T, -200°C to 400°C
4 = E, -200°C to 1000°C
5 = R, -50°C to 1768°C
6 = S, -50°C to 1768°C
7 = B, 250°C to 1820°C
8 = C, 0°C to 2320°C
12 = 25mV
13 = 50mV
14 = 100mV
15 = 200mV
Produced Analog Data
– This data is sent from the SmartBlock to the controller.
Normally this data is
mapped into specific registers in the I/O configuration in Cscape.
For advanced applications NetGet
functions can be used to obtain this data. Since this data is broadcast to all controllers on the network
additional controllers can use NetGet functions to obtain this data as well.
Word
Function
Word 1
INT
Thermocouple Input 1
Word 2
INT
Thermocouple Input 2
Word 3
INT
Thermocouple Input 3
Word 4
INT
Thermocouple Input 4
Word 5
INT
Thermocouple Input 5 (THM200 Only)
Word 6
INT
Thermocouple Input 5 (THM200 Only)
Word 7
INT
Thermocouple Input 5 (THM200 Only)
Word 8
INT
Thermocouple Input 5 (THM200 Only)
