background image

PAGE 4 

14 MAY 2002 

PREFACE 

MAN0484-01 

 

LIMITED WARRANTY AND LIMITATION OF LIABILITY 

 
Horner APG,LLC. ("HE-APG") warrants to the original purchaser that  the SmartStack SAE J1939 Communication 
M

odule

 manufactured by HE-APG is free from defects in material and workmanship under normal use and service.  

The obligation of HE-APG under this warranty shall be limited to the repair or exchange of any part or parts which 
may prove defective under normal use and service within two (2) years from the date of manufacture or eighteen (18) 
months from the date of installation by the original purchaser whichever occurs first, such defect to be disclosed to 
the satisfaction of HE-APG after examination by HE-APG of the allegedly defective part or parts.  THIS WARRANTY 
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE AND OF ALL OTHER OBLIGATIONS OR 
LIABILITIES AND HE-APG NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR 
HE-APG, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS SmartStack SAE J1939 
Communication M

odule.

 THIS WARRANTY SHALL NOT APPLY TO THIS SmartStack SAE J1939 Communication 

M

odule

 OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO ACCIDENT, NEGLIGENCE, ALTERATION, 

ABUSE, OR MISUSE.  HE-APG MAKES NO WARRANTY WHATSOEVER IN RESPECT TO ACCESSORIES OR 
PARTS NOT SUPPLIED BY HE-APG.  THE TERM "ORIGINAL PURCHASER", AS USED IN THIS WARRANTY, 
SHALL BE DEEMED TO MEAN THAT PERSON FOR WHOM THE SmartStack SAE J1939 Communication M

odule

 

IS ORIGINALLY INSTALLED.  THIS WARRANTY SHALL APPLY ONLY WITHIN THE BOUNDARIES OF THE 
CONTINENTAL UNITED STATES. 
 
In no event, whether as a result of breach of contract, warranty, tort (including negligence) or otherwise, shall HE-
APG or its suppliers be liable of any special, consequential, incidental or penal damages including, but not limited to, 
loss of profit or revenues, loss of use of the products or any associated equipment, damage to associated equipment, 
cost of capital, cost of substitute products, facilities, services or replacement power, down time costs, or claims of 
original purchaser's customers for such damages. 
 

To obtain warranty service, return the product to your distributor with a description of the problem, proof of 
purchase, post paid, insured and in a suitable package. 

 

ABOUT PROGRAMMING EXAMPLES 

 

Any example programs and program segments in this manual or provided on accompanying diskettes are included 
solely for illustrative purposes.  Due to the many variables and requirements associated with any particular 
installation, Horner APG cannot assume responsibility or liability for actual use based on the examples and diagrams.  
It is the sole responsibility of the system designer utilizing the SmartStack SAE J1939 Communication M

odule

 to 

appropriately design the end system, to appropriately integrate the SmartStack SAE J1939 Communication M

odule

 

and to make safety provisions for the end equipment as is usual and customary in industrial applications as defined in 
any codes or standards which apply. 
 

Note:  The programming examples shown in this manual are for illustrative  

purposes only.  Proper machine operation is the sole responsibility of the  
system integrator. 

 
 
 
 
 
 

Содержание HE800JCM200





















Отзывы: