HORNER HE800JCM200, Руководство пользователя

Страница: 19 / 20

CH. 3 14 MAY 2002 PAGE 19
MAN0484-01
g. During the configuration, it is possible that the following screen appears. In the event that it does
appear, press the HE800JCM200 Configurator button (located on the Menu bar at the very bottom of the
screen) to return to the configuration screen. This screen simply prompts you to close the JCM200 editor
to continue.
Figure 3.8 - PGN Configuration
h. Here is an example configuration screen.
Figure 3.8 – Example Configuration
Figure 3.9 – Example Configuration
i. After making the register map, you need to save the configuration changes by exiting the configuration
screen and then returning to the
Module Setup screen.
Press here
after making
the register
map.
Then save
your changes
on the screen
that follows.