MAN0508-03
08 JUN 2005
PAGE 5
4
Base ID Switches
Each FOX104 / FOX404 needs a unique Base ID. (Refer to Figure 7 for location of Base ID Switches.)
Set Base ID switches using the following table.
Table 3 - Base ID Switches
ON = 1 | OFF = 0
Switch Number
Base
ID
4
2
1
Illegal 0
0
0
1 0 0 1
2 0 1 0
3 0 1 1
4 1 0 0
5 1 0 1
5
FOX104 / FOX404 LEDs
Table 4 – FOX104 / FOX404 LEDs
FIBER OK
ON indicates FOX’s fiber input cable is properly
connected and is receiving a carrier.
PWR
ON indicates FOX is receiving power.
RUN
•
OFF indicates OCS is in IDLE/STOP mode
or
no
power to the FOX
or
one of the fiber cables are
detached
or
there is a configuration mismatch.
•
Flashing indicates DO / IO mode or RUN with no
ladder program.
•
ON indicates ladder code running.
Figure 8– FOX104 / FOX404 LEDs
FIBER
OK
RUN
PWR
1
2
4
OFF ON
BASE I.D.
001FOX005