HORNER Shearing Longhorn 3.2, Инструкция пользователя

Страница: 6 / 16

6
LONGHORN 12V INSTRUCTION MANUAL
ATTACHING DRIVE
Make sure the EasyDrive clamp is in the open position (Fig.
1) and then push up the long tube and spring into the base
casting of the machine until the top fitting reaches it shoulder
stop (Fig. 2).
Close the EasyDrive clamp to secure the outer drive in position,
the inner drive connects automatically.
Be sure the driveshaft is clamped tightly, the clamp can be
adjusted by screwing the clamp lever in or out before closing
the clamp lever.
Fig. 1
Fig. 2
Solid driveshaft