Strohm SM-CUB-027W-3M V. 1/07.2020
USAGE AND MAINTENANCE MANUAL FOR STROHM SM-
CUB-027W-3M
TABLE OF CONTENT:
1.
Introduction
2.
Characteristics
3.
Safety measures
4.
Fixation of product
5.
Usage of the induction field for wireless
charging
6.
Cleaning and care
7.
Technical information
8.
Recycling
1.
Introduction
The charging Cube is an all-around usable Energy distribution
device for your home. You can use several electrical Devices
per socket and USB port. The cube can also be used to
conveniently charge your smartphone per induction field. The
necessary charging coils are built into certain smartphone
series. To find out if your phone has built in induction coils
check your instruction manual or ask the manufacturer.
Characteristics:
▪
Qi-compatible inductive loading disk
▪
USB ports for the loading of tablet-PCs,
smartphones or the like
▪
3 extra socket with non-interfering placement
▪
Lighted switch to turn the cube on or off
▪
Especially useful for usage behind wardrobes.
▪
Integrated child safety to protect from electric
shocks
2.
Safety measures
▪
Read all safety guidelines and instructions. Keep all
safety guidelines and instructions for future reference.
▪
The cube can’t be used if the case, power line or
power plug show damage. electric shock danger!
▪
Do not attempt to disassemble or repair the cube.
Imme-diately have a defective device repaired or
replaced by a specialty shop.
▪
Always unplug the cable by the plug. The cable may
other-wise be damaged.
▪
Never allow the cube to come into contact with water or
other liquids. Water entering electrical devices will in-
crease the risk of electric shock. Discontinue use of the
cube and take it to a specialty shop.
▪
Do not use the cube if it is covered with something,
be-cause this can cause heat accumulation.
▪
Don’t plug devices in behind each other.
▪
Do not put anything between the to be loaded device
and the inductive loading disk. This can cause fire,
electric shock or heat development.
▪
Discontinue the usage of the cube if you see smoke or
notice an unusual smell.
▪
Do not keep the cube near magnetic strips or chip cards
(identification cards, bank cards etc.) to prevent the
mag-netic function from failing.
▪
Disclaimer: The MTS MarkenTechnikService GmbH &
Co. KG does not guarantee or take responsibility for
damages, which are caused by the improper usage of
the product or the inobservance of the instruction
manual and/or the safety advice.
3.
Fixation of product
To increase the stability of the cube there is a stick pad in the
package. You can adhere the cube onto a smooth service.
Caution, the stick pad can’t hold the weight of the cube, so
you can only adhere it to a horizontal surface with the adhe
sive side downwards
4.
Usage of the induction field for wireless
charging
Turn the cube on at the main switch and place the
smartphone with integrated loading coils onto the cube. A
signal tone and the constant blue light of the LED lamp
beneath the surface indicates the charging of the
smartphone
If the light starts blinking move the smartphone around un- til
the connection is re-established. The charging stops
automatically when the device is fully loaded. The charging
starts anew when the charging volt age declines. If the cubes is
turned off at the main switch, the device c
an’t be charged.
5.
Cleaning and care
Before you can start cleaning you unplug the device. Clean
device only with a soft dry cloth. Do not use an aggressive
cleaning agent. Store the device in a clean, dry place.
6.
Technical information
Nominal voltage: 230 V / 50 Hz
Max connected wattage: 3.680 W / 16 A
Feed line: circa 3 meter H05VV-F 3G1.5 mm2
Output:
• USB: 5 V DC, max. 2,4 A
• Inductive charging: 5V DC, max. 1,0 A
Protection class: IP20 (no protection against water)
Transmission distance of up to ≤ 8 mm
Conversion efficiency ≥ 73%
7.
Recycling
The packaging is made of environmentally friendly materials,
which you can dispose of at local recycling centers. Do not
throw electrical appliances in the household waste!
Imported and distributed by: S.C. Promelek XXI S.A., Str.
Libertății nr. 21, Apahida jud. Cluj,
