Hornbach Pattfield PSC120M1, Руководство пользователя

Страница: 105 / 108

EN 105
PARALLEL GUIDE
Slide the parallel guide into the parallel
guide slide in 11 .
1 Set the desired distance and tighten
the parallel guide clamping knob 8 .
2
CUTTING DEPTH
Open the depth clamping knob 3 . 1 1. Set the desired cutting depth.
2. Close the depth clamping knob 3 .
Make a test on a spare piece before
starting on the workpiece.
2
SAW BLADE REPLACEMENT
Press the spindle lock button 2 .
Caution! Make sure the tool is
switched off and unplugged and
wear protective gloves.
1
Press the spindle lock button 2 again
and tighten the saw blade clamp wash-
er 10 with the hex key.
Caution! The convex surface of the
big washer must point outwards.
4 Place a new saw blade in the tool.
Caution! Observe that the rotation
direction of the saw blade corre-
sponds with the indication on the tool.
3
Loosen the saw blade clamp washer 10
with the hex key and remove the saw
blade.
2
CUTTING ANGLE
Open the bevel angle adjustment lock
knob 9 .
1 1. Set the desired bevel angle.
2. Close the bevel angle adjustment
lock knob 9 .
Make a test on a spare piece before
starting on the workpiece.
2