Hornbach 10533560, Руководство пользователя

Страница: 21 / 80

21
•
Return the heater to its upright position, wheels down.
•
Select a suitable location for the device taking into account all the aforementioned
warnings in this manual.
Warning: only use the heater when it is in an upright
position, with the wheels attached to the bottom (as
pictured on the front of this booklet). Any other position is
dangerous!
Set-up and operation
•
Make sure that both power buttons are set to off (not
pressed in) and turn the thermostat knob as far as
possible towards Max.
•
Now insert the plug into the socket.
•
Operate the heater by pressing one or both power
buttons: 1 button pressed = 1000 W, both buttons
pressed = 2000 W. The heater will start working. To
heat up slowly, for a slight temperature increase or in
a small space, press one button (1000 W). To heat up
quickly, for a larger temperature increase or in a larger
space, press both buttons (2000 W).
•
Once the space has reached the right temperature,
turn the thermostat dial to Min until you hear a click.
The light goes out and the heater shuts down. If you
leave the dial in this position, the heater will maintain
the current temperature by regularly switching on and
off. When the heater is switched on, the light will go on. By turning the thermostat dial
to the left/right, you decrease/increase the set temperature.
•
If so desired, you can now switch to a lower power level.
•
To switch off, press the depressed power button(s) again. The button(s) will come up
again. The heater switches off. Unplug.
•
Note! It takes some time for a radiator to cool down. Give the radiator sufficient time to
cool down before touching or moving (use handle!).
‘
•
Attention! The lamp only burns if the thermostat has switched on the heating
elements!
Safety features
Tipping safeguard
The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it
inadvertently falls over. When the heater is returned to its upright position, it will resume
functioning as normal but, before reusing, switch off, unplug and check for damage. Do not
use the heater if it is damaged or malfunctioning, but have it inspected/repaired!