120
| ENGLISH
1
2
Fasten the cassette mounting
brackets 3x
Screw the cassette mounting
brackets
7
onto the front bar
of the pergola awning with
3 screws
3
each. Keep a
distance of exactly 11 mm from
the rear side of the bar to the
rear side of the brackets and
a distance of 10 cm from the
outer brackets to the corner
plates of the awning. Center the
third bracket between the outer
brackets.
Mount the cassette 1x
At least two ladders or treads
are required in order to obtain
the required height.
Ensure that
the ladders/treads are fi rmly
resting on the ground. Only use
ladders/treads suitable for such
assembly work.
Mount the cassette
4
with the
crank eyelet
1
situated on the left
side. Press it slightly tilted into
the angle between the bar of the
pergola awning and the cassette
mounting bracket
7
. Then
rotate it up against the mounting
bracket.
The cassette must fi rmly
touch the bar and all mounting
brackets.
11 mm
10 cm
1/2
1/2
7
7
3
