ENGLISH |
205
6
Mounting the framing backside
After both wall brackets have
been mounted properly you can
fix the awning.
At least two ladders or treads
are required for steps 5 to 11.
Ensure that the ladders/treads
are firmly resting on the ground
so that you cannot fall. Only use
ladders/treads that are suitable
for such assembly work.
Place the framing with the back-
side beam on the wall mounts
and immediately secure it with
the following parts:
M10 locking nut ,
Ø10 washers ,
M10 nuts and the M10x90 full
thread bolts throughout the
entire assembly (2 x).
Ensure the connections are tight
and secure before moving on to
the frontside beam.
