Pitch angle
[deg]
Number of wall teeth to
be removed
[5..20]
0
[21..40]
1
[41..50]
2
[51..60]
3
Wall teeth
If the new pitch angle set is greater than 20 degrees, it is necessary to remove wall teeth from the
cassette support to adapt it to the new configuration.
Use pliers to remove one tooth at a time, from the cassette support. The total number of teeth to be
removed is explained in the table below.
III.2. Installation of the covers
Install the hand crank in the eyelet
allocated for, on the right side of the
awning.
Please keep the hand crank vertical
while operation to protect the eyelet
from damage.
The rotation of the hand crank in the
two directions allows the opening or the
closing of the awning.
Note:
that the use of the hand crank is
intended for emergencies (e.g. blackout,
breakdown of the product,
…
)
III.3. Manually opening the awning
46 | ENGLISH
