II.1. Anchoring material
II. Installation
WALL TYPE
LOCATION
FASTENING
Concrete
Concrete/ C20-C25
Ceiling
Ceiling / insulated
Wall
Wall / insulated
e.g. TOX Anchor bolt S-Fix Pro 1 A4
e.g. TOX Thermo Proof Plus
e.g. TOX Anchor bolt S-Fix Pro 1 A4
e.g. TOX Thermo Proof Plus
Solid brick
Clay brick/MZ
Sand-lime / KS
Wall
Wall / insulated
e.g. TOX Masonry Set Wallix
e.g. TOX Thermo Proof Plus
Perforated brick
Clay brick / HLZ
Sand-lime brick / KSL
Wall
Wall / insulated
e.g. TOX Masonry Set Wallix
e.g. TOX Thermo Proof Plus
Aerated concrete
Gas concrete / BP2
Wall
Wall / insulated
e.g. TOX Masonry Set Wallix
e.g. TOX Thermo Proof Plus
Cavity wall
Wall / insulated
e.g. TOX Thermo Proof Plus
WARNING
The installation of the awning must be conducted by a qualified
person.
Install the brackets on the wall using the right anchors.
Consult a specialist to identify the wall type and the carrying
capacity of the installation site alongside with
the type of
anchoring required.
The variables motioned above will affect the wind resistance of
the awning.
Make sure that instructions of the manufacturer of the anchoring
material have been respected before installation of the awning.
The table below provides basic recommendations of fastening for different wall types.
Please consult a specialist to determine your wall type and the appropriate fastening.
The specialist will be also able to determine the wind resistance class of the awning
based on the condition of the wall and the fastening used.
Width [cm] x
Projection [cm]
Extraction load on
anchoring [kN]
3 x 2.5
5.4
3,6 x 2.5
6.35
4 x 3
9.48
4,2 x 3
9.55
4,5 x 3
10.56
4,8 x 3
10.85
5 x 3
11.64
40 | ENGLISH
