220V Plug
Converter
Draft Cover
Bubble Level
LCD Touch
Screen
50g
Calibration
Weight
10g
Calibration
Weight
Leveling
Feet
9V Power Supply
-US Plug Adapter
-EURO Plug Adapter
PARTS LIST
KEYPAD BUTTON FUNCTIONS
ON/ OFF (mechanical button)
: Tap to turn on. Hold for three seconds to turn off.
ZERO
: Tap to zero scale.
UNITS
: Tap to select measurements in
Grains
(gn),
Grams
(g),
Ounce
(oz) or
Carat
(ct). Press and hold button for 6 seconds to toggle sound on and off.
CAL
: Press and hold to enter calibration.
CAL + ON/OFF
: Press and hold to enter the backlight setting mode. Tap the
ZERO
button to toggle between
BL ON/BL OFF.
POWER SUPPLY
(Adapter)
:
Input: AC100-240V - 50Hz/60Hz
Output: DC 9V 1A
CALIBRATION
• For optimal performance, turn unit on
and allow 5-15 minutes to warm up.
• Verify powder pan has been
removed, and that the steel scale
plate is empty.
• Press CALIBRATE button for three
seconds until unit displays “CAL ---“.
• When 10.00g is flashing, place the
10g weight on the center of the scale
plate. The unit will show “---- --”
while calibrating the 10g weight.
• When 10.00g appears again, remove
the weight.
• When 50.00g is flashing, place the
50g weight on the center of the scale
plate. The unit will show “---- --”
while calibrating the 50g weight.
• When 50.00g appears again, remove
the weight
• After calibration, the unit will briefly
display “PASS” before returning to
normal operation.
WARRANTY
The Hornady M2 Digital Bench Scale is a highly sensitive instrument, which must be
repaired and serviced by a factory qualified technician to maintain the warranty.
Hornady Manufacturing warrants to you that for one year from the date of
purchase, your Bench Scale will be free from defects in material and workmanship.
This warranty does not cover damage caused by normal wear, accidents, abuse,
or failure to provide proper care and maintenance. Please contact Hornady
Manufacturing at 1-800-338-3220 for service or warranty information.
The warranty is void if the seal on bottom of unit has been tampered with.
PRODUCT REGISTRATION AND SERVICE
You must register this product in order to obtain warranty service. Submit through
our website by going to
hornady.com/warranties.
