Horizon Hobby XG14 Скачать руководство пользователя страница 89

Страница: 89 / 112

▋

Wing▋Type【WING▋TYPE】

▋

Function▋Explanation

Here the wing type can be set. Dual ailerons and dual flaps, dual elevators, dual rudders,

tailless planes, and V-tail wings can be selected.

▋

Setting▋Method

▋

For▋Airplane

⿟ Wing Type (WING)

Select the Main Wing Type.

፧

Normal (NORMAL)

For standard airplane wing types.

፧

Flaperon (FLAPERON)

For wings with Dual Aileron. Also, mixing Dual Aileron as Flaps is possible.

The following channel outputs are used:

Channel2 (AILE)

: Right Aileron (RAIL)

Channel6 (FLAP) : Left Aileron (LAIL)

፧

Delta (DELTA)

It is possible to set up a Delta Wing to use Elevons.

The following channel outputs are used:

Channel2 (AILE)

: Left Elevon (LEVN)

Channel6 (FLAP) : Right Elevon (REVN)

※ The actual meaning of “DELTA” is a defined wing shape, and not a tailless airplane. However, JR does call

tailless airplanes deltas (eg the F-102 or Dassault Mirage III).

፧

4 Aileron (4AILE)

For wings with Four Ailerons

The following channel outputs are used:

Channel2 (AILE)

: Right Aileron1 (RAL1)

Channel7 (AUX2) : Right Aileron2 (RAL2)

Channel5 (GEAR) : Left Aileron1 (LAL1)

Channel8 (AUX3) : Left Aileron2 (LAL2)

፧

6 Aileron (6AILE)

For Wings with 6 Ailerons

The Following channel outputs are used.

Channel 2 (AILE) : Right Aileron 1(RAL1)

Channel 7(AUX2) : Right Aileron 2(RAL2)

Channel 9(AUX4) : Right Aileron 3(RAL3)

Channel 5(GEAR) : Left Aileron 1(LAL1)

Channel 8(AUX3) : Left Aileron 2 (LAL2)

Channel 10(AUX5) : Left Aileron 3 (LAL3)

Helicopter

Airplane

DANGER

WARNING

CAUTION

Glider

System▋List

Dual Channel/Mate Trim

Dual Trim Setting

Wing Type

Tail Type

XG14English.indd 87

2013/07/16 16:41

Содержание XG14

















































































































Результаты поиска

Содержание XG14

Отзывы:

Horizon Hobby XG14, Руководство по эксплуатации, Страница: 89 / 112

Результаты поиска

Содержание XG14

Отзывы: