Horizon Hobby Vaterra Kalahari, Руководство пользователя

Страница: 8 / 38

EN
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
INSTALLING THE VEHICLE BATTERY
1
Ensure the ESC is powered OFF.
2
Remove the clips from the
battery strap posts and remove
the battery strap.
3 Install the fully charged battery into
the chassis as shown. Ensure the
battery is lying fl at on the chassis.
4 Connect the battery to the ESC.
5 Reinstall the battery strap and clips.
6 Power ON the transmitter,
then the vehicle.
CAUTION: NEVER remove the
transmitter batteries while the vehicle
is powered ON, as loss of control,
property damage or injury may result.
THE TRANSMITTER / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
INSTALLING THE TRANSMITTER BATTERIES
1 Push in the battery cover a small
amount to release the retaining tab,
then remove the cover.
2 Install 4 AA batteries, taking care
to align the battery polarity to the
diagram in the transmitter’s
battery case.
3 Carefully reinstall the battery cover
by aligning the tabs with the slots
on the transmitter.
CAUTION: If using rechargeable
batteries, charge only rechargeable
batteries. Charging non-rechargeable
batteries may cause the batteries to
burst, resulting in injury to persons
and/or damage to property.