10
EN
Power Components Service
Insta
ll
Re
mo
ve
CAUTION:
DO NOT handle propeller parts
while the fl ight battery is connected. Personal
injury could result.
Disassembly
1. Disconnect the battery from the
ESC/receiver.
2. Carefully cut at the seam on each nacelle and
remove the bottom half.
3. Hold the prop shaft using needle-nose
pliers or hemostats.
4. Turn the propellers counterclockwise (facing
the front of the model) to remove. Turn the
propeller clockwise to install.
5. Hold the nut (
A
) on the end of the prop
shaft using needle-nose pliers or
hemostats.
6. Turn the gear on the shaft to remove the nut.
7. Gently pull the shaft (
B
) from the gearbox (
C
)
and make sure the washer (
D
) and two
bushings (
E
) are not lost.
8. Disconnect the motor from the ESC/
receiver.
9. Gently push the motor out of the
gearbox and remove the motor
through the bottom of the nacelle.
NOTICE:
DO NOT remove the gearbox from
the aircraft. Damage to the aircraft will result.
Assembly
Assemble the aircraft using the instructions
above in reverse order.
• Correctly align the prop shaft gear with the
pinion gear on the motor.
• Connect the motor to the ESC/receiver so
that the powered motor turns the propeller
counterclockwise (facing the front of the model).
• Make sure the propeller size numbers (112 x 90)
face away from the motor (see illustration).
• Attach the spinner to the propeller using foam-
compatible CA (Cyanoacrylate adhesive).
• Assemble each nacelle into place and secure with
foam-compatible CA.
112 x 90
E
C
D
112 x 90
A
B
