Horizon Hobby EXTRA 300 1.3M Скачать руководство пользователя страница 16

EN

16

Extra 300 1.3m

Limited Warranty

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the 
product purchased (the “Product”) will be free from defects in materials 
and workmanship at the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic damage, 
(ii) damage due to acts of God, accident, misuse, abuse, negligence, 
commercial use, or due to improper use, installation, operation or 
maintenance, (iii) modifi cation of or to any part of the Product, (iv) 
attempted service by anyone other than a Horizon Hobby authorized 
service center, (v) Product not purchased from an authorized Horizon 
dealer, or (vi) Product not compliant with applicable technical regulations, 
or (vii) use that violates any applicable laws, rules, or regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO 
OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS 
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, 
THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER 
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT 
THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE 
PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy 
shall be that Horizon will, at its option, either (i) service, or (ii) replace, 
any Product determined by Horizon to be defective. Horizon reserves 
the right to inspect any and all Product(s) involved in a warranty 
claim. Service or replacement decisions are at the sole discretion of 
Horizon. Proof of purchase is required for all warranty claims. SERVICE 
OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE 
PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION 
OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH 
CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT 
LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in 
no event shall the liability of Horizon exceed the individual price of the 
Product on which liability is asserted. As Horizon has no control over 
use, setup, fi nal assembly, modifi cation or misuse, no liability shall be 
assumed nor accepted for any resulting damage or injury. By the act of 
use, setup or assembly, the user accepts all resulting liability. If you as 
the purchaser or user are not prepared to accept the liability associated 
with the use of the Product, purchaser is advised to return the Product 
immediately in new and unused condition to the place of purchase.

Law

These terms are governed by Illinois law (without regard to confl ict of law 
principals). This warranty gives you specifi c legal rights, and you may also 
have other rights which vary from state to state. Horizon reserves the right 
to change or modify this warranty at any time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide warranty 
support or service. Once assembly, setup or use of the Product has 
been started, you must contact your local distributor or Horizon directly. 
This will enable Horizon to better answer your questions and service 
you in the event that you may need any assistance. For questions 

or assistance, please visit our website at www.horizonhobby.com, 
submit a Product Support Inquiry, or call the toll free telephone number 
referenced in the Warranty and Service Contact Information section to 
speak with a Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in 
the country you live and use the Product in, please use the Horizon 
Online Service Request submission process found on our website or call 
Horizon to obtain a Return Merchandise Authorization (RMA) number. 
Pack the Product securely using a shipping carton. Please note that 
original boxes may be included, but are not designed to withstand the 
rigors of shipping without additional protection. Ship via a carrier that 
provides tracking and insurance for lost or damaged parcels, as Horizon 
is not responsible for merchandise until it arrives and is accepted 
at our facility. An Online Service Request is available at http://www.
horizonhobby.com/content/_service-center_render-service-center. If 
you do not have internet access, please contact Horizon Product 
Support to obtain a RMA number along with instructions for submitting 
your product for service. When calling Horizon, you will be asked to 
provide your complete name, street address, email address and phone 
number where you can be reached during business hours. When 
sending product into Horizon, please include your RMA number, a list of 
the included items, and a brief summary of the problem. A copy of your 
original sales receipt must be included for warranty consideration. Be 
sure your name, address, and RMA number are clearly written on the 
outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have any 
issue with a LiPo battery, please contact the appropriate Horizon 
Product Support offi ce.

Warranty Requirements 
For Warranty consideration, you must include your original sales 
receipt verifying the proof-of-purchase date.

 Provided warranty 

conditions have been met, your Product will be serviced or replaced free 
of charge. Service or replacement decisions are at the sole discretion 
of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be 
completed and payment will be required without notifi cation 
or estimate of the expense unless the expense exceeds 50% of 
the retail purchase cost

. By submitting the item for service you 

are agreeing to payment of the service without notifi cation. Service 
estimates are available upon request. You must include this request 
with your item submitted for service. Non-warranty service estimates 
will be billed a minimum of ½ hour of labor. In addition you will be billed 
for return freight. Horizon accepts money orders and cashier’s checks, 
as well as Visa, MasterCard, American Express, and Discover cards. By 
submitting any item to Horizon for service, you are agreeing to Horizon’s 
Terms and Conditions found on our website http://www.horizonhobby.
com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in 
the country of use and ownership. If received, a non-compliant 
Product will not be serviced. Further, the sender will be responsible 
for arranging return shipment of the un-serviced Product, through 
a carrier of the sender’s choice and at the sender’s expense. 
Horizon will hold non-compliant Product for a period of 60 days 
from notifi cation, after which it will be discarded.

10/15

Содержание EXTRA 300 1.3M






















Отзывы: