background image

EN

19

FCC ID: BRWDASRX15

This device complies with part 15 of the FCC rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation.

CAUTION: 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

This product contains a radio transmitter with wireless technology which has been 

tested and found to be compliant with the applicable regulations governing a radio 

transmitter in the 2.400GHz to 2.4835GHz frequency range.

Supplier’s Declaration of Conformity

EFL Twin Otter 1.2m BNF Basic with AS3X and SAFE Select  |  EFL30050

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference that 

may cause undesired operation.

CAUTION: 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

NOTE:

 This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC 

2904 Research Rd.,

Champaign, IL 61822

Email: [email protected]

Web: HorizonHobby.com

FCC Information

IC Information

CAN ICES-3 (B)/NMB-3(B)

IC: 6157A-AMRX15

This device complies with Industry Canada licence-exempt RSS standard(s). Opera-

tion is subject to the following two conditions: (1) this device may not cause  

interference, and (2) this device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

Compliance Information for the European Union

EFL30075 Twin Otter 1.2m PNP:

 

Horizon Hobby, LLC hereby declares 

that this product is in compliance with the essential requirements and 

other relevant provisions of the EMC Directive.

EFL30050 Twin Otter 1.2m BNF BASIC:

 

Horizon Hobby, LLC hereby declares that 

this product is in compliance with the essential requirements and other relevant 

provisions of the RED and EMC Directives.
A copy of the EU Declaration of Conformity is available online at: 

http://www.horizonhobby.com/content/support-render-compliance.

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the 

user’s responsibility to dispose of their waste equipment by handing it 

over to a designated collections point for the recycling of waste electri-

cal and electronic equipment. The separate collection and recycling 

of your waste equipment at the time of disposal will help to conserve 

natural resources and make sure that it is recycled in a manner that protects human 

health and the environment. For more information about where you can drop off your 

waste equipment for recycling, please contact your local city office, your household 

waste disposal service or where you purchased the product.

Содержание E-flite Twin Otter 1.2m





















Отзывы: