background image

15

EN

Warranty and Service Contact Information

Country of Pur-

chase

Horizon Hobby

Contact Information

Address

United States
of America

Horizon Service Center (Repairs and Repair Requests)

servicecenter.horizonhobby.com/RequestForm/

4105 Fieldstone Rd 
Champaign, Illinois, 61822 USA

Horizon Product Support (Product Technical Assistance)

[email protected]
877-504-0233

Sales

[email protected]
800-338-4639

European Union

Horizon Technischer Service

[email protected]

Hanskampring 9
D 22885 Barsbüttel, Germany

Sales: Horizon Hobby GmbH

+49 (0) 4121 2655 100

FCC ID: BRWDASRX15, BRWDXE

 

This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference that may cause undesired operation. 

NOTICE:

 Modifi cations to this product will void the user’s authority to operate this equipment.

FCC Information

IC Information

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in the country you live 
and use the Product in, please use the Horizon Online Service Request submission process 
found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) 
number. Pack the Product securely using a shipping carton. Please note that original boxes 
may be included, but are not designed to withstand the rigors of shipping without additional 
protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, 
as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. 
An Online Service Request is available at http://www.horizonhobby.com/content/service-
center_render-service-center. If you do not have internet access, please contact Horizon 
Product Support to obtain a RMA number along with instructions for submitting your product 
for service. When calling Horizon, you will be asked to provide your complete name, street 
address, email address and phone number where you can be reached during business hours. 
When sending product into Horizon, please include your RMA number, a list of the included 
items, and a brief summary of the problem. A copy of your original sales receipt must be 
included for warranty consideration. Be sure your name, address, and RMA number are 
clearly written on the outside of the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo 
battery, please contact the appropriate Horizon Product Support offi ce.

Warranty Requirements 
For Warranty consideration, you must include your original sales receipt verifying 
the proof-of-purchase date.

 

Provided warranty conditions have been met, your Product 

will be serviced or replaced free of charge. Service or replacement decisions are at the sole 
discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service will be completed and payment 
will be required without notifi cation or estimate of the expense unless the expense exceeds 
50% of the retail purchase cost. By submitting the item for service you are agreeing to 
payment of the service without notifi cation. Service estimates are available upon request. 
You must include this request with your item submitted for service. Non-warranty service 
estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for 
return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, 
MasterCard, American Express, and Discover cards. By submitting any item to Horizon for 
service, you are agreeing to Horizon’s Terms and Conditions found on our website http://
www.horizonhobby.com/content/service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use 
and ownership. If received, a non-compliant Product will not be serviced. Further, 
the sender will be responsible for arranging return shipment of the un-serviced 
Product, through a carrier of the sender’s choice and at the sender’s expense. 
Horizon will hold non-compliant Product for a period of 60 days from notifi cation, 
after which it will be discarded.

 10/15

Compliance Information for the European Union

EU Compliance Statement:

Horizon Hobby, LLC  hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED and EMC 
Directives.

A copy of the EU Declaration of Conformity is available online at: http://www.horizonhobby.com/content/support-render-compliance.

Instructions for disposal of WEEE by users in the European Union

 This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a 
designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at 
the time of disposal will help to conserve natural resources and make sure that it is recycled in a manner that protects human health and the environment. 
For more information about where you can drop off your waste equipment for recycling, please contact your local city offi ce, your household waste disposal 
service or where you purchased the product.

IC: 6157A-AMRX15, 6157A-DXE

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”

Содержание BLADE 330 X
























Отзывы: