14
EN
IC Information
IC: 28206-ESKY008083
This device contains license-exempt transmitter(s)/receivers(s)
that comply with Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s). Operation is
subject to the following 2 conditions:
1. This device may not cause interference.
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
Compliance Information for the European Union
EU COMPLIANCE STATEMENT:
Blade 150 FX RTF (BLH4400)
Hereby, Horizon Hobby, LLC declares that the
device is in compliance with the following:
EU Radio Equipment Directive 2014/53/EU; Low
Voltage Directive (LVD) 2014/35/EU; RoHS 2 Direc-
tive 2011/65/EU; RoHS 3 Directive - Amending
2011/65/EU Annex II 2015/863
The full text of the EU declaration of conformity is available at
the following internet address:
https://www.horizonhobby.com/content/support-render-
compliance.
NOTE:
This product contains batteries that are covered under
the 2006/66/EC European Directive, which cannot be disposed
of with normal household waste. Please follow local regulations.
Wireless Frequency Range and Wireless Output Power:
2406-2475 MHz
19.72dBm
EU Manufacturer of Record:
Horizon Hobby, LLC
2904 Research Road
Champaign, IL 61822 USA
EU Importer of Record:
Horizon Hobby, GmbH
Hanskampring 9
22885 Barsbüttel Germany
WEEE NOTICE:
This appliance is labeled in accordance with
European Directive 2012/19/EU concerning waste
of electrical and electronic equipment (WEEE). This
label indicates that this product should not be
disposed of with household waste. It should be
deposited at an appropriate facility to enable
recovery and recycling.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Horizon Hobby, LLC
2904 Research Rd.,
Champaign, IL 61822
Email: [email protected]
Web: HorizonHobby.com
