EN
6
TRANSMITTER LAYOUT
Use the diagram below to familiarize yourself with the different parts of your transmitter.
The transmitter antenna is mounted internally and is located in the front portion of the transmitter. When you are driving
your model, hold the transmitter so it is oriented as close to vertical as possible. Do not try to follow your model with
the transmitter. This provides the best RF signal between the transmitter and the receiver. Do not cover the front of the
transmitter during use as doing so can block the RF signal, resulting in loss of control.
ST. REV
TH. REV
ST. REV
TH. REV
ST. REV
TH. REV
Normal < > Reverse
Changes the direction
of steering or throttle
Steering Trim
Adjust to make the vehicle drive straight
with no input of the steering wheel
Steering Wheel
Turn right or left to
steer the vehicle
Bind Button
Power Switch
Battery Cover
Battery Level Indicator
Solid Red:
Battery voltage is good.
Flashing Red:
Battery voltage is
critically low (below 4V). Replace
the transmitter batteries.
ST. REV
TH. REV
Throttle Trim
Adjusts the throttle control rate
Steering Dual Rate
Adjusts the total steering travel
ST. REV
TH. REV
Throttle Trigger
Pull to drive forward
Push to drive in reverse
Reverse
Forward
Stop
LED Control
Off/On/Flashing
