8
EN
The radio system should be checked before operating the vehicle to ensure proper operation and adequate range.
1. Turn on the transmitter.
2. Connect the battery in the vehicle.
3. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts.
4. Walk away until you are at the maximum planned operating distance from the vehicle.
5. Turn the steering wheel side to side and operate the throttle, both forward and reverse, checking for any erratic behavior.
6. If any erratic behavior is exhibited, DO NOT operate the vehicle. Call customer service for assistance.
RANGE-CHECKING THE RADIO SYSTEM
BINDING
Binding is the process of programming the receiver to recognize the
GUID (Globally Unique Identifier) code of a single specific transmitter.
The transmitter and receiver are bound at the factory. If you need to
rebind, follow the instructions below.
1. Connect a fully charged battery pack to the ESC/receiver.
2. Press and hold the bind button on the receiver.
3. Power ON the receiver. The red LED flashes, indicating the
receiver is in bind mode. Release the bind button after the red LED
begins to flash. The motor will make continuous descending tones
until binding is complete.
4. With the throttle trigger at neutral, press and hold the transmitter
bind button while powering on to put the transmitter in bind mode.
The throttle should be at neutral to set failsafe.
5. The bind process is complete when the green LED on the receiver
remains lit.
You must rebind when different failsafe positions are needed e.g.,
when throttle or steering reversing has been changed.
Bind Button
Bind Button
Power Button
Power Switch
The vehicle features 4-wheel steering. The rear wheels are controlled
using the A/B transmitter switch. The steering moves to one of five
possible positions; centered, 50% in either direction or 100% in either
direction.
To activate the steering:
1. Press either the A or B button once to move the rear steering to
50% travel.
2. Press the same button twice to move to 100% travel in the same
direction.
3. Press the opposite button three times to re-center the rear wheels.
USING THE 4-WHEEL STEERING
