EN
7
INSTALL THE TRANSMITTER BATTERIES
REMOVE THE VEHICLE BODY
1. Press the battery compartment latch and rotate the batter cover to open.
2. Install 4 AA alkaline batteries (or Ni-Cd or Ni-MH), verifying correct polarity.
3. Close the battery cover until it latches.
CAUTION:
NEVER remove the transmitter batteries while the
vehicle is powered ON. Loss of vehicle control, damage, or injury
may occur.
CAUTION:
If using rechargeable batteries, charge only
rechargeable batteries. Charging non-rechargeable batteries may
cause the batteries to burst, resulting in injury or property damage.
CAUTION:
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to state and local laws.