2. Once you're satisfied that the wing is
centered, attach the wing using the 6
rubber bands provided. Stretch two of
the rubber bands from the front to the
rear attach points. Stretch the next two
diagonally across the middle. Stretch the
last two rubber bands from the front to
rear attach points as you did with the first
two. Once the rubber bands are in place,
confirm the wing is securely attached.
3. Before each flight, make sure the front
and trailing edges of the wing are exactly
centered on the fuselage.
R
c
Step
2
Mounting the Landing Gear
1. Insert the landing gear into the slot on
bottom of the fuselage.
Note:
When flying without X-Port
™
modules and landing on grass, it is not
necessary to have the landing gear installed.
Attaching the Wing
1. Center the wing on the fuselage by
aligning the center dot on the wing with
the fuselage top seam and by centering
the half circle on the wing’s trailing edge
over the fuselage center.
Needed for Step 2
Rubber Bands (x6)
Main Landing Gear
Wing and Landing Gear Attachment
Содержание AerBird3
Страница 1: ...Instruction Manual...