6
7
ASSEMBLY
STeP 1
A
Gently push the
FRoNT FooT
through the
Foot Bracket and align the holes on Foot
Bracket with the holes in the Foot.
B
Tighten the
FRoNT FooT
using two
BoLTS
(J03)
.
C
Press
FooT eND CAP
to both ends of the
FRoNT FooT
.
BOLT (J03)
5/16" x 16L
Qty: 2
HARDWARe BAG 1
CONTENTS :
FRONT FOOT
FOOT END CAP X 2
MAIN FRAME
J03x2
To ReDUCe THe RISk oF SeRIoUS INJURy, ReAD THe ImPoRTANT SAFeTy
PReCAUTIoNS BeFoRe USING THIS eqUIPmeNT:
• Read all instructions in this manual before using this equipment.
• Use this equipment only as described in this Owner’s Manual.
• Never allow children to use this unit.
• Inspect and tighten all parts before using this equipment. Replace any worn parts immediately.
• Observers should be warned to stay away from unit while in use. Failure to do so may cause injury to observer and/or exerciser.
• Never stick fingers or foreign objects through fan cover. Keep small children away from the air rower while in use. Failure to do so
could cause injury to child or unit.
• Never remove any of the safety guards that are attached to your air rower. If removal is required for any service or maintenance,
this should be done only by your authorized dealer and must be replaced before use.
• Wear appropriate workout attire, including running or aerobic shoes, when using the rower.
WARNING
1. Before beginning any exercise program, always consult your physician. If you experience chest pains, nausea, dizziness or
shortness of breath, stop exercising and consult your physician before continuing.
2. The hexagon wrench must be pulled from the cable before you use your rowing machine. Please hold the handlebar
firmly, then release the hexagon wrench and gently return the handlebar to its resting / start position. This will eliminate the
handlebar returning quickly avoiding injury or damage to the machine.
OXFORD IV
OXFORD IV
